Home

This meter measures the power injected into the electrical network, the consumption of your home. It measures a voltage of 220V to 240V. To be used for single-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with CT clamps 120A/40mA.

This electric cable with a section of 2.5 mm2 for three-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

VDE and IEC certified cable.

• Control your consumables remotely via the ALMA SOLAR application
• Measurement of consumption and graphic reading on the application
• Monitoring of socket consumption up to 16A/input
• Scenario activation based on the states of connected devices, solar production, solar battery status, weather, time, location, brightness* (*depends on a device with sensor)

Connects directly to the solar inverter to monitor your home consumption and regulate the solar panels' power. Measures up to 100 A/phase.

Electrical box (alternative current) for photovoltaic protection. Cabinet including wiring diagram. Required for each photovoltaic system.

AC box 230 V AC single-phase up to 4 kW with differential circuit breaker 16 A - 30 mA + surge arrester type A.

Electrical box for photovoltaic protection. DC box includes wiring diagram. Required for every photovoltaic system.

DC box under 600 V DC, 1 string, switch 25 A, lightning, MC4 

The ECC gateway connects your microinverters to the Solax cloud application, enabling you to retrieve and manage all the information from your microinverters.

Microinverter
Single phase
Best perfomance
25 years warranty
Online connection

- Model: FD19D ComfortLine

- Protection class: IP2XC

- Current: 63 A

- Dimensions: 1350 x 250 x 160 mm

Wall mount for GoodWe Lynx batteries. You only need one piece per location. Up to 4 GoodWe batteries.

Improved performance and increased power
P7 patented technology
Positive tolerance: 10%
Superior strength

Output raised to 97,1%
Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

- Model name: S751/3DR-E40
- Number of poles: 3
- Protection current: 63A 25kA
- Voltage rating: 230V / 400V
- Device type: Selective main circuit breaker

- Model name: S751/3DR-E40
- Number of poles: 3
- Protection current: 50A 25kA
- Voltage rating: 230V / 400V
- Device type: Selective main circuit breaker

- Model name: S751/3-E40
- Number of poles: 3
- Protection current: 40A 25kA
- Rated voltage: 230V / 400V
- Device type : Selective main circuit breaker

Improved performance and increased power
P7 patented technology
Positive tolerance: 10%
Superior strength

SOLD IN LOTS OF 36 PANELS - Full pallet

Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Microinverter
Single phase
Best perfomance
20 years warranty
Online connection
Integrated consumables management

Connect up to 5 microinverters to a single string. If you have more microinverters, then you connect each string in parallel on your electrical panel.

This electric cable with a section of 6 mm2 for single-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

Cable is VDE and IEC certified.

Plug & Play connection to inverter
4G communication via Smart Dongle-4G
Support max 10 inverters communication

• Control your consumables remotely via the ALMA SOLAR application
• Measurement of consumption and graphic reading on the application
• Monitoring 120A consumption per phase (three-phase)
• Scenario activation based on the states of connected devices, solar production, solar battery status, weather, time, location, brightness* (*depends on a device with sensor)
• Supplied with 3 current clamps

Use this meter to measure your home's energy consumption and control it with the ALMA SOLAR app.
Determine the consumption of each appliance in your home.
Comes with 3 clamps: each can be used for one measurement (Clamp 1: Solar + Clamp 2: Battery + Clamp 3: Network).
Works with single-phase or three-phase power.

This meter is required if your solar inverter is not yet compatible with the ALMA SOLAR app.

- Model name: S751/3DR-E40
- Number of poles: 3
- Protection current: 40A 25kA
- Voltage rating: 230V / 400V
- Device type: Selective main circuit breaker

High Compatibility
Compatible with both single-phase and three-phase meters

Easy Installation
Supports din-rail installation inside the cabinet for 85 Vac-277 Vac power supply

Wide Coverage
Offers efficient and stable data transmission of up to 300 m long distance

Strong Penetration
With better signal through the wall effect, can provide up and down multi-floor communication, strong anti-interference ability