Home

• Control your consumables remotely via the ALMA SOLAR application
• Measurement of consumption and graphic reading on the application
• Monitoring 120A consumption per phase (three-phase)
• Scenario activation based on the states of connected devices, solar production, solar battery status, weather, time, location, brightness* (*depends on a device with sensor)
• Supplied with 3 current clamps

Buy your APS EZ1 micro inverter directly from our online store. The great special feature of this APS micro inverter is that it can connect 2 solar modules. They optimize the production of the two solar modules and yet make them completely independent of each other. Thanks to this new technology, you can reduce the number of micro-inverters and optimize profitability: more power and lower costs. With the EZ1 model, monitoring is already integrated and the inverter can be controlled via Wifi or Bluetooth.
A maximum of 2 units can be connected in series.

- Type CA15V small distribution board

- Powder-coated sheet steel, 800 x 300 x 160 mm

- 400V AC 50/60 Hz, 125 A

- IP44 protection, Protection Class II

Connects in parallel to your electrical circuit and connects directly to your Solax solar inverter to monitor your home consumption and regulate the power of your solar panels.

Measures between 5A and 200A per phase for 24mm diameter cables. 

This electric cable with a section of 4 mm2 for three-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

VDE and IEC certified cable.

Wifi communication card for connecting your ABB inverters UNO and TRIO via Wifi and monitoring their performance remotely.

- Product Type: FD17

- ComfortLine Series

- Dimensions: 1050 x 250 x 160mm

- Material: Plastic Cover

Buy your micro-inverter APS DS3 directly on our online webshop. The micro-inverter APS specification is allows a connexion for 2 solar panels on the same micro-inverter. It optimizes solar panels production and become them completely independent from each orders. With this new technology, you reduce the number of micro-inverter and moreover you optimize profitability: More performance and less expensive.

You must order the APS cable to connect the micro-inverters to each other.

Extend your FRONIUS inverter warranty Fronius Galvo 1.5-1, 2.0-1, 2.5-1, 3.0-1, 3.1-1; Fronius Primo 3.0-1; Fronius Symo 3.0-3-S, 3.0-3-M; Fronius Symo Hybrid 3.0-3-S to 10 years.

The Enphase Envoy communications gateway is the core of your network. Homeowners can easily monitor the status of their system using the LCD screen of the Envoy and get more detailed information for each module via Enlighten, the monitoring and analysis software by Enphase.

WIFI directly included in this ENVOY-S gateway.

The ECU communication gateway is the core of your network. Owners can easily monitor the status of their system using the LCD screen or get information by solar panel via the monitoring software and APS testing.

Frameless, transparent bifacial glass modules
Performance Guarantee
Positive Tolerance 0-5W
30-Year Warranty
Complete Protection

Currently available only in full pallets
(25 pieces)

- Model name: S753DR-E80
- Number of poles: 3
- Protection current: 80A 25kA
- Voltage rating: 400 V
- Device type: Selective main line circuit breaker

- U41 Small Distributor, flush-mounted

- Dimensions: 310mm W x 684mm H x 120mm D

- Protection Class II, IP31 Rated

- Indoor use, rated 125 A, 400V

The Modbus SolarEdge meter is used for photovoltaic supervision, consumption monitoring at home and for monitoring the power grid. The meter measures currents from 50 A to 1,000 A and supports residential and commercial installations. The meter connects to the SolarEdge inverter or gateway control and communication via RS485.

Card for Kostal product extension. Specific card for Germany.

- Wall-mounted enclosure

- Indoor use, IP54

- Rated current 250 A

- Dimensions: 1100 x 300 x 215mm

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

This meter measures the power injected into the electrical network, the consumption of your home. To be used for three-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with 3 CT clamps 120A/40mA.

- Model name: S753DR-E100
- Number of poles: 3
- Protection current: 100A 25kA
- Voltage rating: 400 V
- Device type: Selective main line circuit breaker

With this Base Unit, the new SMA Home Storage can be set up directly on the floor as an alternative to the supplied wall bracket. One base is required for each battery tower.

This electric cable with a section of 6 mm2 for three-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

VDE and IEC certified cable.

- Wall-mounted enclosure

- Indoor use, IP54 - 250 A, RAL 9016

- Dimensions: 1100 x 300 x 215mm

- Product: CA16V, partially constructed small distribution cabinet

- Technical specifications: 400V AC 50/60 Hz, rated current In of 125 A, protection class II, IP44 protection

- Dimensions: 950 x 300 x 160 mm

- Weight: 13,068 kg.