Home

- Model name: S201M-B32
- Number of poles: 1
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-B25
- Number of poles: 1
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-C20
- Number of poles: 1
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- S201M-C16 circuit breaker

- Trip characteristic C

- 35 mm² conductor cross-section

- Dimensions: 17.5mm x 88mm x 69mm

SMA battery communication cable 3 metersSMA connection cable for SMA Home Storage batteries.
3 meters long
Suitable for outdoor installation.

Extend the I'M SOLAR profiles with these rail connectors. Simply slide them directly on to the 2 profiles to make the junction.

Install your solar panels on steel decks using this I'M SOLAR mounting bracket. Only for vertical use. Wave hight variation 375 mm max.

- Model name: S201M-C25
- Number of poles: 1
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S201M-C10
- Number of poles: 1
- Protection current: 10A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

Tool to connect the MULTI-CONTACT solar cable connectors.

Use this connector from TRONC for SOLAX X1 microinverters to connect AC cables and microinverters. You have one side with a male end and the other female end. The 3rd is the end piece for connecting the SOLAX microinverter connector.

Complete system ready to be installed. Rail length 1411mm.

Renusol RS1 clamp

A single module clamp for all module frame heights from 30 to 50 mm and all functions (clamping in the middle and at the end with a single type of clamp; to do this, simply turn the clamping head 90°).You no longer need a single flange or double flange, this flange allows both functions. So you get fewer parts for mounting and therefore a faster installation. Black color for solar panel with black frame. Clamping base compatible with all Renusol rails.

ESDEC ClickFit EVO fiber cement fastener is a reliable solution for installing solar panels on fiber cement roofs. Designed to respect the integrity of this type of roofing, it offers a solid, durable fastening adapted to the most demanding climatic conditions. Made from high-quality materials, it guarantees safe installation while simplifying the installation process. Thanks to its ergonomic design, this fastener reduces installation time and ensures harmonious integration of the panels.

Install your solar panels on your blacon with these hooks attached behind the panel. Please note that you need to take the blacon clamps and the blacon bar to ensure the installation of your panel. Please refer to the accessories tab on this product page.

The bar attaches diagonally to the back of 2 I'M SOLAR triangles. Length: 1.75m.

Multi-contact MC4 connectors for connecting solar panels. Connect one string with 1 cable.

Multi-contact MC4 connectors for connecting solar panels

This tool allows you to disconnect your IQ Enphase micro-inverter from its connector. It can also be used to tighten the tip termination.

This product is very useful for mounting all Enphase products. 

Complete system ready to be installed. Rail length 1523mm.

Complete system ready to be installed. Rail length 2139mm

- Model name: S201M-B40
- Number of poles: 1
- Protection current: 40A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

The ESDEC tile hook is a stainless steel or aluminum fastener optimized for pitched tile roofs. It features an adjustable base and pivoting arm to adapt to variations in batten height. Its design guarantees even distribution of mechanical loads and enhanced resistance to climatic stress, while preserving the structural integrity of the tiles.

- Model name: S201M-C32
- Number of poles: 1
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

The ESDEC ClickFit EVO slate hook is specially designed for slate roofs, offering a reliable and durable solution for the installation of solar panels. Thanks to its innovative design, it adapts perfectly to slate surfaces without damaging them. Made from robust materials, it is weather-resistant and guarantees secure panel attachment. Quick and easy to install, this hook considerably reduces installation time while ensuring a solid, efficient installation.

Complete system ready to be installed. Rail length 2035mm.

The connectors are located 1.3m apart from eachother in portrait mode. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of Enphase micro-inverters you have ordered.

This solution is ready to use.

- Model name: S201M-B50
- Number of poles: 1
- Protection current: 50A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-C40
- Number of poles: 1
- Protection current: 40A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

The Renusol Slate Hook is suitable for almost all types of pitched roofs in Europe with Slate tiles. This hook allows you to install it on your roof with the most diverse roofing materials and substructures. You attach your RENUSOL rail directly to it. The solar panels are placed on the rails.

4-pin shielded cable Li2YCYv for RS485 cabling, 10 meters (indoor and outdoor)

Female connector for IQ Enphase micro-inverter. 

Male connector for IQ Enphase micro-inverter. 

The TrussHook tile roof hook, compatible with the ESDEC ClickFit EVO system, offers a reliable and efficient solution for the installation of solar panels. Specifically designed for tiled roofs, it guarantees a sturdy fastening while preserving the integrity of the roof. Made from durable materials, it withstands extreme weather conditions and ensures optimum longevity. Easy to install thanks to its intuitive design, the TrussHook reduces installation time and ensures perfect alignment of solar panels.

- Product Type: ZK81P5 Connecting Cable 35sqmm

- Net Weight: 0.229 kg

- Package Dimensions: 145x110x20 mm