Home

- Model name: S203M-C50
- Number of poles: 3
- Protection current: 50A 10kA
- Voltage rating: 230 / 400 V
- Device type : Miniature circuit breaker
- Characteristic : Type C

Electrical conduit for outdoor installation. You can run up to 8 wires inside. Be careful not to mix solar cables (direct current) and alternating current cables. Supplied with the wire puller to facilitate the installation of your cables indoors.

Buy HUAWEI Solar optimizer 450W at an exceptional price on Alma Solar. For the best online prices, secured payments and fast delivery, visit our Alma-Solarshop.

The connectors are located 2.4m apart from eachother. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of APS QT2 micro-inverters you have ordered.

This solution is ready to use.

Huawei SUN2000-600W-P, smart power optimizer.
One optimizer for all application scenarios.
Huawei's power optimizers are the innovative solution for maximizing the yield of PV systems through module-external electronics.

Buy your optimizer SOLAREDGE P850 exclusively online. Communication with the inverter SOLAR EDGE is done via Bluetooth. With this optimizer, you can install your panels in all directions. Your solar panels are then independent from each other. In addition, the optimizer enables you to cut your solar panels' power supply directly at the junction box, i.e. without any fire hazard. You can monitor each panel separately on the SOLAR EDGE website

Maximum power: 12,750 W - Connect up to 50 optimizers on the same serial connection. Optimizer works only with SOLAREDGE 3-phase inverters.

Length: 12 mm
Color palette: French color code
Cross section: 16mm²
Color: Ivory
1 item corresponds to a pack of 100 ferrules

For FRONIUS and SMA inverters.

Length: 12 mm
Color palette: DIN color code
Cross section: 6mm²
Color: Yellow
1 item corresponds to a pack of 100 ferrules

- Model: ABB Quickadapter 2CDH700902R0001

- Type: S750DR-QA

- For: S753DR or S751/3DR 3-Pole

- Model name: S751DR-E100
- Number of poles: 1
- Protection current: 100A 25kA
- Voltage rating: 230V
- Device type : Selective main line circuit breaker

- Model name: S751DR-E100
- Number of poles: 1
- Protection current: 80A 25kA
- Voltage rating: 230V
- Device type : Selective main circuit breaker

Cable 1x4 mm² photovoltaic CR 100 m

Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V

The ECU communication gateway is the core of your network. Owners can easily monitor the status of their system using the LCD screen or get information by solar panel via the monitoring software and APS testing.

ECU B only works for the communication of up to 4 solar panels.

With this card, the ABB inverter will automatically adapt the output power in order to maximise self-consumption or in order to avoid feeding power into the grid according to the system settings.

In addition, this UNO-DM-COM KIT is equipped with a configurable switching relay which can be used for manage external loads with custumizable activation power and temporal thresholds (basic load management capability).

The ABB inverter can be easily integrated with third party monitoring and control systems using this accessory board.

Plug & Play connection to inverter
Wifi communication via Smart Dongle-Wifi
Support of 3rd-party monitoring systems

- Model name: S200M-B63
- Number of poles: 3
- Protection current: 63A 440V
- Rated voltage: 230 / 400 V
- Device type: Miniature circuit breaker
- Characteristic : Type B

External Relay for IQ7 In Enphase installations, the Q Relay (Network System Relay Controller) acts as a physical disconnect relay controller for installations.

Wifi communication card to connect your SOLAR-EDGE inverter via Wifi and monitor its performance remotely.

Buy your optimizer SOLAREDGE S440 exklusively online. Communication with the inverter SOLAR EDGE is done via Powerline. With this optimizer, you can install your panels in all directions. Your solar panels are then independent from each other. In addition, the optimizer enables you to cut your solar panels' power supply directly at the junction box, i.e. without any fire hazard. You can monitor each panel separately on the SOLAR EDGE website. Compatible only with solar panels with 60 and 72 cells.

Maximum power per batch in serie: 5700W - Inverter HD WAVE / 11250W - Three-phase inverter

Maximum number of optimizers in serie: 25 - HD Wave inverter / 50 - Three-phase inverter

- Model name: F204A-63/0,3, 63A/0,3mA
- No. of poles: 4
- Protection Current: 300 mA
- Rated voltage: 230 / 400 V
- Device type: earth leakage circuit breaker
- Charaistic: Type A

Measure the current in your home with this sensor that plugs around the chosen power cable. 

Connect up to 3 cables.

Length: 18 mm
Color palette: DIN color code
Cross section: 16mm²
Color: Blue
1 item corresponds to a pack of 100 ferrules

For SMA inverter Core1 set complet

Buy your optimizer SOLAREDGE S500 exclusively online. Communication with the inverter SOLAR EDGE is done via Bluetooth. With this optimizer, you can install your panels in all directions. Your solar panels are then independent from each other. In addition, the optimizer enables you to cut your solar panels' power supply directly at the junction box, i.e. without any fire hazard.You can monitor each panel separately on the SOLAR EDGE website.

Maximum power per batch in serie: 5700W - Inverter HD WAVE / 11250W - Three-phase inverter

Maximum number of optimizers in serie: 25 - HD Wave inverter / 50 - Three-phase inverter

Fixing for floor installation of GoodWe Lynx batteries. You only need one piece per location.

Cable 1x4 mm² photovoltaic CR 100 m

Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V

• Reduced dimensions and improved design
• Flexible stand and wall sticker included
• Includes temperature, presence and brightness sensors
• Control via ALMA SOLAR application
• Connection via Wifi
• Battery included with lifespan 5 years, recharge by cable

Zigbee range extender dongle operating in 2.4GHz band for the Enphase IQ Battery To be used in specific conditions (not mandatory) specified in installation manual

25-year guarantee
30-year performance guarantee
Chinese brand
Monocrystalline cells with N-TYPE technology
Anti-PID treatment / Hotspot protection

Temperature sensor for SUNNY ISLAND. This sensor permit you to use a Lead battery.

Complete system ready to be installed. Package contents:

- 1x FLA BASE
- 1x FLA SEMELLE TOP PV 6*300*850
- 1x FLA FRONT FOOT 125
- 1x FLA BOTTOM FOOT 250

This system can be installed on all flat horizontal surfaces, including flat roofs with sufficient load resistance and a roof slope of up to 5%.

- Model name: OVR T2 3N 40-275 P QS
- No. of poles: 3N
- Protection Current: 100 kA
- Rated voltage: 230 / 400 V
- Device type: Protective device
- Charaistic: Type 2

Buy your SUNGROW SP600S optimizer exclusively online. Communication with the SUNGROW inverter is integrated. Thanks to this optimizer, you can install your panels in any orientation. The panels become independent of each other. In addition, the optimizer allows you to cut off the power supply to the solar panels directly at the outlet of the junction box, you eliminate any risk of fire. The supervision of each of the panels is done online on the SUNGROW website.

This optimizer is suitable for series connection of up to 2 high efficiency modules or bifacial

The advantage of the optimizer is that you plug in a set of 2 solar panels at once. You can then smart manage 2 panels at the same time. This reduces installation time and costs through an increase in performance.

This electric cable with a section of 2.5mm2 for single-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

Cable is VDE and IEC certified.