Home

Buy your SMA TIGO TS4-A-O at the best price on our shop. This optimizer works with all brands of solar inverters. This optimizer allows you to manage shading on the solar panels and optimize solar production of each solar panel. Also, if you have different exposition on your roof, this optimizer is able to manage. You will have the best solar production.

- Model name: F204A-40/0,3
- No. of poles: 4
- Protection Current: 4 kV 300 mA
- Rated voltage: 230 / 400 V
- Device type: Earth leakage circuit breaker
- Characteristic: Type A

Battery cable for TRIPLE POWER H9.0 battery with a length of 1.8m

Order the AC cable for SOLAX X1 microinverter with a length of 2.2m. Generally used for installations with solar panels in horizontal format. It connects to the SOLAX trunk connector and allows the connection of all microinverters.

KNIPEX - Pince à sertir pour fiches Western RJ11 / RJ12 / RJ45, longueur 190mm

- Model name: S203M-C63
- Number of poles: 3
- Protection current: 63A 10kA
- Voltage rating: 230 / 400 V
- Device type: Miniature circuit breaker
- Characteristic : Type C

- Model name: S203M-C50
- Number of poles: 3
- Protection current: 50A 10kA
- Voltage rating: 230 / 400 V
- Device type : Miniature circuit breaker
- Characteristic : Type C

Battery cable for Growatt battery to install more than 3 APX 5.0-P1 modules

Buy your optimizer SOLAREDGE P850 exclusively online. Communication with the inverter SOLAR EDGE is done via Bluetooth. With this optimizer, you can install your panels in all directions. Your solar panels are then independent from each other. In addition, the optimizer enables you to cut your solar panels' power supply directly at the junction box, i.e. without any fire hazard. You can monitor each panel separately on the SOLAR EDGE website

Maximum power: 12,750 W - Connect up to 50 optimizers on the same serial connection. Optimizer works only with SOLAREDGE 3-phase inverters.

Electrical conduit for outdoor installation. You can run up to 8 wires inside. Be careful not to mix solar cables (direct current) and alternating current cables. Supplied with the wire puller to facilitate the installation of your cables indoors.

Buy HUAWEI Solar optimizer 450W at an exceptional price on Alma Solar. For the best online prices, secured payments and fast delivery, visit our Alma-Solarshop.

Connects directly to the solar inverter to monitor your home consumption and regulate the solar panels' power. Measures up to 100 A.

The connectors are located 2.4m apart from eachother. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of APS QT2 micro-inverters you have ordered.

This solution is ready to use.

Length: 12 mm
Color palette: French color code
Cross section: 16mm²
Color: Ivory
1 item corresponds to a pack of 100 ferrules

Length: 12 mm
Color palette: DIN color code
Cross section: 6mm²
Color: Yellow
1 item corresponds to a pack of 100 ferrules

- Model: ABB Quickadapter 2CDH700902R0001

- Type: S750DR-QA

- For: S753DR or S751/3DR 3-Pole

Huawei SUN2000-600W-P, smart power optimizer.
One optimizer for all application scenarios.
Huawei's power optimizers are the innovative solution for maximizing the yield of PV systems through module-external electronics.

- Model name: S751DR-E100
- Number of poles: 1
- Protection current: 100A 25kA
- Voltage rating: 230V
- Device type : Selective main line circuit breaker

- Model name: S751DR-E100
- Number of poles: 1
- Protection current: 80A 25kA
- Voltage rating: 230V
- Device type : Selective main circuit breaker

Cable 1x4 mm² photovoltaic CR 100 m

Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V

The ECU communication gateway is the core of your network. Owners can easily monitor the status of their system using the LCD screen or get information by solar panel via the monitoring software and APS testing.

ECU B only works for the communication of up to 4 solar panels.

With this card, the ABB inverter will automatically adapt the output power in order to maximise self-consumption or in order to avoid feeding power into the grid according to the system settings.

In addition, this UNO-DM-COM KIT is equipped with a configurable switching relay which can be used for manage external loads with custumizable activation power and temporal thresholds (basic load management capability).

The ABB inverter can be easily integrated with third party monitoring and control systems using this accessory board.

Plug & Play connection to inverter
Wifi communication via Smart Dongle-Wifi
Support of 3rd-party monitoring systems

- Model name: S203M-B63
- Number of poles: 3
- Protection current: 63A 440V
- Rated voltage: 230 / 400 V
- Device type: Miniature circuit breaker
- Characteristic : Type B