50 meter ground cable 8UL1015 green/yellow 6 mm²
50 meter ground cable 8UL1015 green/yellow 6 mm²
Temperature sensor for SUNNY ISLAND. This sensor permit you to use a Lead battery.
Extend your DELTA inverter warranty RPI H3A, H4A and H5A to 10 years.
Connection for SMA and FRONIUS up to 150A. Length 0.5m.
Connects directly to the solar inverter to monitor your home consumption and regulate the solar panels' power. Measures up to 100 A.
Measure the current of your home with this sensor that plugs around the cable of selected food. Connect up to 3 cables.
External Relay for IQ7 In Enphase installations three-phase, the Q Relay (Network System Relay Controller) acts as a physical disconnect relay controller for installations.
Wifi communication card for connecting your ABB inverters UNO and TRIO via Wifi and monitoring their performance remotely.
Cable 1x6 mm² photovoltaic CR 100 m Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V
For SMA inverter Core1 set complet
Extend your ABB inverter warranty TRIO-5.8-TL to 10 years.
The Enphase Envoy communications gateway is the core of your network. Homeowners can easily monitor the status of their system using the LCD screen of the Envoy and get more detailed information for each module via Enlighten, the monitoring and analysis software by Enphase. WIFI directly included in this ENVOY-S gateway.
Fronius three-phase smart meter 65A-3 monitors the consumption of your home and adjusts the inverter's production. This meter communicates with your Fronius inverter and avoids the injection of surplus from your inverter into the power grid. The current sensors are not supplied. To order in addition.
Extend your FRONIUS inverter warranty Fronius Galvo 1.5-1, 2.0-1, 2.5-1, 3.0-1, 3.1-1; Fronius Primo 3.0-1; Fronius Symo 3.0-3-S, 3.0-3-M; Fronius Symo Hybrid 3.0-3-S to 10 years.
Connects directly to the solar inverter to monitor your home consumption and regulate the solar panels' power. Measures up to 100 A/phase.
The SolaX adapter box is combined with a heat pump with dry contact function.With a dry contact it is possible to activate a heat pump in connection with the photovoltaic inverter. The inverter can control the adapter box to efficiently use the solar energy according to the requirements defined by the user (grid power, battery capacity, time, etc.)....
Tool to connect the MULTI-CONTACT solar cable connectors.
Measure the current of your home with this sensor that plugs around the corresponding power cable.
The Enphase COMMS kit is required to establish the data connection between the Encharge storage units and the Enphase Envoy. The data connection runs via Zigbee. It is connected to the Envoy via USB. Including repeater for bridging longer distances between Encharge and Envoy. Only one COMMS kit is required per system, regardless of the number of batteries.
Buy your communication GATEWAY TIGO ENERGY with CLOUD CONNECT an power supply box at the lowest price online only. This solution enables the communication between smart solar panels and panels with solar optimizers by TIGO TS4. The GATEWAY antenna is set up directly behind the smart solar panels, collects all the data and sends it over via RS485 cables to...
The next-generation Envoy-S Metered provides energy usage insights, remote update capabilities and load management, enabling a more cost-effective and reliable solar installation while adding significant value for system owners. "Metered" version. Including 2 portals with Envoy-S Metered.
3-phase measurement solution with SMA wire-speed interface for phase-accurate and netted determination of electrical values (limiting current 63A)
The Modbus SolarEdge meter is used for photovoltaic supervision, consumption monitoring at home and for monitoring the power grid. The meter measures currents from 50 A to 1,000 A and supports residential and commercial installations. The meter connects to the SolarEdge inverter or gateway control and communication via RS485.
Extend your FRONIUS inverter warranty Fronius GEN24 SYMO to 10 years.
Connects directly to the KOSTAL inverter to monitor your home consumption and regulate the solar panels' power.
Cable with 4.5m of length for SOLAREDGE HD-WAVE SETAPP EV-CHARGER inverter. TYPE 2.
Heater controller which adjusts the power supplied to the heater based on the available power currently produced by your photovoltaic panels (up to 3 kW).
Cable with 7,6m of length for SOLAREDGE HD-WAVE SETAPP EV-CHARGER inverter. TYPE 2.
SMA inverter production recorder (up to 50 units). The SUNNY HOME MANAGER communicates with the inverters via SPEEPDWIRE/Bluetooth link. It transfers all the data for analysis and display to an Internet server or to a local PC (integrated web server). The new version 2.0 of the SUNNY HOME MANAGER allows you to manage your electrical appliances remotely...
Extend your ABB inverter warranty TRIO-12.5-TL to 10 years.
Extend your ABB inverter warranty TRIO-27.6-TL to 10 years.
Ideal solution to manage string inverters by SMA (type SunnyBoy or Sunny Tripower). Allows to manage the power output, to integrate sensors (temperature, sunlight, etc.). Equipped with a web server: It can send the data of up to 50 SMA inverters to the online server.