Prices drop

Buy your micro-inverter APS DS3-L directly on our online webshop. The micro-inverter APS specification is allows a connexion for 2 solar panels on the same micro-inverter. It optimizes solar panels production and become them completely independent from each orders. With this new technology, you reduce the number of micro-inverter and moreover you optimize profitability: More performance and less expensive.

You must order the APS cable to connect the micro-inverters to each other.

Buy your APS EZ1 micro inverter directly from our online store. The great special feature of this APS micro inverter is that it can connect 2 solar modules. They optimize the production of the two solar modules and yet make them completely independent of each other. Thanks to this new technology, you can reduce the number of micro-inverters and optimize profitability: more power and lower costs. With the EZ1 model, monitoring is already integrated and the inverter can be controlled via Wifi or Bluetooth.
A maximum of 2 units can be connected in series.

Buy your APS QT2 three-phase microinverter directly from our online store. The great feature of this APS microinverter is that it allows you to connect 4 solar panels to 2 independent inputs. It optimizes solar panels production and become them completely independent from each orders. With this new technology, you reduce the number of micro-inverter and moreover you optimize profitability: More performance and less expensive.

You must order the APS cable to connect the micro-inverters to each other.

Mounting bracket for fixing your Growatt APX battery to the ground.

10x connectors for ⌀6mm ground cable, M8 hole to ground your photovoltaic system.

Install your solar panels on your blacon with these hooks attached behind the panel. Please note that you need to take the blacon clamps and the blacon bar to ensure the installation of your panel. Please refer to the accessories tab on this product page.

Battery cable for TRIPLE POWER H12.0 battery with a length of 1.2m

Battery cable for TRIPLE POWER H9.0 battery with a length of 1.8m

Battery cable for Growatt battery to install more than 3 APX 5.0-P1 modules

Battery management system is required for manage your PylonTech battery serie H2-V2.

Battery management system for the Solax IES series. X1 or X3. The article is only required once per inverter purchased and is compatible with 1 - 6 batteries.
From 4 batteries, you also need the "Series Box" with an additional floor bracket and the connection box for two battery columns.

Battery management system is required for manage your TRIPLE POWER battery serie H.

Battery management system is required for manage your TRIPLE POWER battery serie HV-S3.6 & HV-S2.5.

Module BMS pour batterie Huawei LUNA2000-5-C0 Power Module

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
11.000 Wh Storage Capacity
10.200 W Output Power

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
13.800 Wh Storage Capacity
12.800 W Output Power

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
13.800 Wh Storage Capacity
15.350 W Output Power

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
19.300 Wh Storage Capacity
17.900 W Output Power

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design

This is just a single battery module.

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
22.100 Wh Storage Capacity
17.900 W Output Power

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
8.300 Wh Storage Capacity
7.650 W Output Power

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
10200 Wh Storage Capacity
10225 W Output Power

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
12800 Wh Storage Capacity

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design

This is just a single battery module.

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
5.100 Wh Storage Capacity
5.100 W Output Power

High voltage Lithium Battery
90% discharge
6.000 cycles or more
Lightweight design
7.700 Wh Storage Capacity
7.675W W Output Power

The BYD Combiner Box centralizes high-voltage battery connections to simplify and secure installations. Compatible with BYD storage systems, it optimizes energy management thanks to built-in protection and easy configuration.

Connect 2 or 3 battery stacks.

Quick and easy installation without any tools. For 4
and 6mm2 cable. No risk:
- Cable breakage
- Induction loop
- Rodents
- Premature ageing of the cable

Cable duct with a length of 2m, white color with a dimension of 60x40mm. This duct allows you to pass up to 16 cables. Be careful, you must not mix solar cables (DC direct current) and alternating cables (AC alternating current) in the same duct.

Article Number: 262616
EAN: 4011923099176
Strap Length: 203 mm
Strap Width: 4.6 mm
Max. Bundle Diameter: 52 mm
Min. Holding Force: 22 N
Color: Black
Material: Plastic
Operating Temperature: -40 - 85 °C
Mounting Temperature: -5 - 85 °C
Material Quality: Polyamide PA
Packaging Unit: 100 pieces

This is a UV-resistant cable tie, perfect for use under constant UV exposure.

Adapter, patch cable, RJ45. CAT5E
RJ45 M, 2 X RJ45 F, length 0.19 M

1 x RJ45 male to 2 x RJ45 female, 8-pole, 1:1 wiring.

Connector's hood for IQ Enphase micro-inverter. 

MC4 multi-contact brand connectors for connection to solar panels and for SOLAX battery. This MC4 variant has a sealing ring.

Connectors MC4 for connecting solar panels

This MC4 variant has a sealing ring.

Tool to connect the MULTI-CONTACT solar cable connectors.