Home

This meter measures the power injected into the electrical network, the consumption of your home. To be used for three-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with 3 CT clamps 120A/40mA.

- Model name: S753DR-E100
- Number of poles: 3
- Protection current: 100A 25kA
- Voltage rating: 400 V
- Device type: Selective main line circuit breaker

The IQ Energy Router integrates Enphase solar and battery storage systems with electric vehicle charging stations to optimize self-consumption and minimize costs.

With this Base Unit, the new SMA Home Storage can be set up directly on the floor as an alternative to the supplied wall bracket. One base is required for each battery tower.

This electric cable with a section of 6 mm2 for three-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

VDE and IEC certified cable.

- Wall-mounted enclosure

- Indoor use, IP54 - 250 A, RAL 9016

- Dimensions: 1100 x 300 x 215mm

- Product: CA16V, partially constructed small distribution cabinet

- Technical specifications: 400V AC 50/60 Hz, rated current In of 125 A, protection class II, IP44 protection

- Dimensions: 950 x 300 x 160 mm

- Weight: 13,068 kg.

Set of 2 reusable handles for easy handling of the IQ-5P battery.

This single-phase Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid SK-SU and Solax Hybrid X1-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs for 2 Solax outputs and 1 output for a parallel connection to your house grid.

Add this box if you wish to secure your power supply at all times and even in the event of a power outage.

Extend your ABB inverter warranty TRIO-5.8-TL to 10 years.

Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

The WALLBOX power boost measures the power taken from the network, sends the data to the WALLBOX charger so that it regulates the charging power and avoids excessive energy consumption in the home, eliminating any risk of blackout.