Home

Complete system ready to be installed with 15° inclination. Package contents:

- 1x FlamcoFix Falx mounting block

This system can be installed on all flat horizontal surfaces, including flat roofs with sufficient load resistance and a roof slope of up to 5°.

A convenient 5-meter Plug-and-Play cable designed specifically for seamless integration with SolaX X1 Micro-Inverters, simplifying installation processes.

The SolaX adapter box is combined with a heat pump with dry contact function.
As long as your appliance has a dry contactor, this box allows your appliance to be connected to the photovoltaic inverter. The inverter controls the box to activate your heater according to your settings (available panel power, battery status, time, etc.).

Typically customers activate when there is excess solar energy and battery storage capacity. This part of the energy can be used to activate the heat pump or cumulus in the required temperature range.

Note: The adapter box is only compatible with SolaX Hybrid G4 and Boost G4 models. 

- Model name: S203M-C25
- Number of poles: 3
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type: Circuit breaker
- Characteristic : Type C

- Model name: S203M-C20
- Number of poles: 3
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S203M-C6
- Number of poles: 3
- Protection current: 6A 10kA
- Rated voltage: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

Length: 12mm
Color series: French color code
Cross section: 6mm²
Color: Green
1 item corresponds to a pack of 100 ferrules

• Control your consumables remotely via the ALMA SOLAR application
• Automatic color change depending on consumption
• Monitoring of socket consumption up to 12A
• Scenario activation based on the states of connected devices, solar production, solar battery status, weather, time, location, brightness* (*depends on a device with sensor)

- Model name: S203M-C40
- Number of poles: 3
- Protection current: 40A 10kA
- Voltage rating: 230 / 400 V
- Device type: Circuit breaker
- Characteristic : Type C

- Model name: S203M-C32
- Number of poles: 3
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: F204 A-40/0.03
- Number of poles: 4
- Protection current: 40 A, 30mA
- Rated voltage: 230 / 400 V
- Device type: differential circuit breaker
- Characteristic: Type A

Install your solar panels with I'M SOLAR triangles on a flat roof or on the ground. Attach your profiles directly to these triangles using the pre-drilled holes. Installation in PORTRAIT or LANDSCAPE mode.

Length 2.3 meters
Three-phase

Order the AC cable for SOLAX X1 microinverter with a length of 1.6m. Generally used for installations with solar panels in vertical format. It connects to the SOLAX trunk connector and allows the connection of all microinverters.

Measure the current in your home with this sensor. It plugs directly into your Chint DDSU or DTSU meter.
Then connect this plug around the cable that runs between your home's electrical panel and your electricity supplier's meter.

These CT clamps can measure currents between 5A and 200A.

The diameter of these clamps is 24mm.

These clamps are programmed to work with SOLAX inverters and CHINT meters.

Add ENPHASE current transformers to monitor a polyphase or three-phase installation with the ENVOY-S Metered.

The SolarEdge 100 A current meter measures the current of your home and in the power grid. Connect to the SolarEdge electricity meter.

Buy your SMA TIGO TS4-A-O at the best price on our shop. This optimizer works with all brands of solar inverters. This optimizer allows you to manage shading on the solar panels and optimize solar production of each solar panel. Also, if you have different exposition on your roof, this optimizer is able to manage. You will have the best solar production.

Order the AC cable for SOLAX X1 microinverter with a length of 2.2m. Generally used for installations with solar panels in horizontal format. It connects to the SOLAX trunk connector and allows the connection of all microinverters.

- Model name: F204A-40/0,3
- No. of poles: 4
- Protection Current: 4 kV 300 mA
- Rated voltage: 230 / 400 V
- Device type: Earth leakage circuit breaker
- Characteristic: Type A

Battery cable for TRIPLE POWER H9.0 battery with a length of 1.8m

KNIPEX - Pince à sertir pour fiches Western RJ11 / RJ12 / RJ45, longueur 190mm

- Model name: S203M-C63
- Number of poles: 3
- Protection current: 63A 10kA
- Voltage rating: 230 / 400 V
- Device type: Miniature circuit breaker
- Characteristic : Type C