Home

Quick and easy installation without any tools. For 4
and 6mm2 cable. No risk:
- Cable breakage
- Induction loop
- Rodents
- Premature ageing of the cable

Finalize your installation with the I'M SOLAR plastic tips that you put on I'M SOLAR profiles.

Use these clamps with I'M SOLAR triangles. Only for horizontal use.

Renusol VS+ is suitable for nearly all types of pitched roofs in Europe. The reasonable choice of roof hooks allows the installation in the roof with the most diverse roof covering materials and substructures. Two mounting rails for medium and high load. Module clamps adjustable for different frame heights. Patented – one clamp for middle and end clamping.

ESDEC end cap to secure the termination flange. This tip slides into the ESDEC rail.

A specialized tool for safely disconnecting AC trunk ports, ensuring ease of maintenance and system management in SolaX X1 Micro-Inverter installations.

Install your solar panels on your blacon with these clamps on the balcony bar.
Please note that you need to take the blacon hooks and the blacon bar to ensure the installation of your panel. Please refer to the accessories tab on this product page.

I'M SOLAR middle clamp (old generation) that works for solar panels with a thickness of 31 - 50 mm.

Complete system ready to be installed. You need 3 clips per Falx block.

I'M SOLAR single clamp (old generation) that works for solar panels with a thickness of 31 - 50 mm.

Fix your solar panels with a thickness from 30 to 40 mm with black I'M SOLAR middle clamps. The I'M SOLAR mounting system is adaptable for all solar panels.

Connector's hood for IQ Enphase micro-inverter. 

To ground your solar panels at home.

Fasten your solar panels with I'M SOLAR's simple black clamps for panel thicknesses from 30 mm to 40 mm. The I'M SOLAR fastening system is suitable for all solar panels.

Fasten your solar panels with I'M SOLAR single clamps for panel thicknesses from 30 mm to 40 mm. The I'M SOLAR fastening system is suitable for all solar panels.

This tool allows you to disconnect your IQ Enphase micro-inverter from its connector. It can also be used to tighten the tip termination.

This product is very useful for mounting all Enphase products. 

10x connectors for ⌀6mm ground cable, M8 hole to ground your photovoltaic system.

Fix your solar panels with a thickness from 30 to 30 mm with I'M SOLAR middle clamps. The I'M SOLAR mounting system is adaptable for all solar panels.

Advantages of product :

To fix your profile to the hooks. Batch of 10.

- Model name: S201M-B16
- Number of poles: 1
- Protection current: 16A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

Renusol RS1 clamp

A single module clamp for all module frame heights from 30 to 50 mm and all functions (clamping in the middle and at the end with a single type of clamp; to do this, simply turn the clamping head 90°). You no longer need a single flange or double flange, this flange allows both functions. So you get fewer parts for assembly and therefore a faster installation. Silver color. Clamping base compatible with all Renusol rails.

ESDEC rail connectors allow 2 rails to be fastened together for a more solid installation.

- Model name: S201M-B10
- Number of poles: 1
- Protection current: 10A 10kA
- Rated voltage: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

Fix your solar panels directly on the nail top using these I'M SOLAR clamps.

Hanger bolts for installing your solar panels on corrugated iron, fiber-cement, etc. Hanger bolt M10 x 300mm.

ESDEC ClickFIT EVO clamp: A single clamp for all module frame heights from 30 to 50 mm and all functions (clamping in the middle and at the end with a single type of clamp; to do this, simply turn the clamping head 90°). This means fewer parts for assembly, and faster installation. These clamps are compatible with ESDEC brand rails.

Install your solar panels on steel decks using this I'M SOLAR mounting bracket. Only for horizontal use.

Male AC plugs designed for secure and efficient connection within SolaX X1 Micro-Inverter systems, ensuring reliable power transmission.

LAN communication card to connect your SOLAX inverter and monitor its performance remotely.

Install your solar panels on your blacon with these hooks attached behind the panel. Please note that you need to take the blacon clamps and the blacon bar to ensure the installation of your panel. Please refer to the accessories tab on this product page.

- Model name: S201M-B20
- Number of poles: 1
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

Adapter, patch cable, RJ45. CAT5E
RJ45 M, 2 X RJ45 F, length 0.19 M

1 x RJ45 male to 2 x RJ45 female, 8-pole, 1:1 wiring.

Advantages of product :

To fix your profile to the hooks. Batch of 10.

Female AC plugs designed for secure and efficient connection within SolaX X1 Micro-Inverter systems, ensuring reliable power transmission.

Article Number: 262616
EAN: 4011923099176
Strap Length: 203 mm
Strap Width: 4.6 mm
Max. Bundle Diameter: 52 mm
Min. Holding Force: 22 N
Color: Black
Material: Plastic
Operating Temperature: -40 - 85 °C
Mounting Temperature: -5 - 85 °C
Material Quality: Polyamide PA
Packaging Unit: 100 pieces

This is a UV-resistant cable tie, perfect for use under constant UV exposure.