Accessories

Connects directly to the solar inverter to monitor your home consumption and regulate the solar panels' power. Measures up to 250 A.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

The Enphase COMMS kit is required to establish the data connection between the IQ-5P Encharge storage units and the Enphase Envoy. The data connection runs via Zigbee. It is connected to the Envoy via USB.

The Enphase COMMS kit is required to establish the data connection between the Encharge storage units and the Enphase Envoy. The data connection runs via Zigbee. It is connected to the Envoy via USB.

This meter measures the power injected into the electrical network, the consumption of your home. It measures a voltage of 220V to 240V. To be used for single-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with CT clamps 120A/40mA.

This meter measures the power injected into electrical grid, consumption of your home. The connexion type is available in the installation instructions at the bottom of this page. 

It measures a voltage from 220V to 240V. Use it for single-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with CT clamps.

Connects directly to the solar inverter to monitor your home consumption and regulate the solar panels' power. Measures up to 100 A/phase.

Our meters offer various advantages:
- Pulse output programmable S0
- Double rates
- Partial indexes registration resettable
- Energy measurement active/reactive, imported/exported
- Cumulative Index by price
- Can be used in single-phase

50 meter ground cable 8UL1015 green/yellow 6 mm²

External Relay for IQ7 In Enphase installations three-phase, the Q Relay (Network System Relay Controller) acts as a physical disconnect relay controller for installations.

Accessories for TRIPLE POWER batteries including:
- Cover to put the H9-H12 batteries in 2 columns
- Cables between the 2 columns
- Screws

Connects in parallel to your electrical circuit and connects directly to your Solax solar inverter to monitor your home consumption and regulate the power of your solar panels.

Measures between 5A and 200A per phase for 24mm diameter cables. 

This electric cable with a section of 4 mm2 for three-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

VDE and IEC certified cable.

Wifi communication card for connecting your ABB inverters UNO and TRIO via Wifi and monitoring their performance remotely.

Extend your FRONIUS inverter warranty Fronius Galvo 1.5-1, 2.0-1, 2.5-1, 3.0-1, 3.1-1; Fronius Primo 3.0-1; Fronius Symo 3.0-3-S, 3.0-3-M; Fronius Symo Hybrid 3.0-3-S to 10 years.

The Enphase Envoy communications gateway is the core of your network. Homeowners can easily monitor the status of their system using the LCD screen of the Envoy and get more detailed information for each module via Enlighten, the monitoring and analysis software by Enphase.

WIFI directly included in this ENVOY-S gateway.

The ECU communication gateway is the core of your network. Owners can easily monitor the status of their system using the LCD screen or get information by solar panel via the monitoring software and APS testing.

The Modbus SolarEdge meter is used for photovoltaic supervision, consumption monitoring at home and for monitoring the power grid. The meter measures currents from 50 A to 1,000 A and supports residential and commercial installations. The meter connects to the SolarEdge inverter or gateway control and communication via RS485.

Card for Kostal product extension. Specific card for Germany.

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

This meter measures the power injected into the electrical network, the consumption of your home. To be used for three-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with 3 CT clamps 120A/40mA.

The IQ Energy Router integrates Enphase solar and battery storage systems with electric vehicle charging stations to optimize self-consumption and minimize costs.

With this Base Unit, the new SMA Home Storage can be set up directly on the floor as an alternative to the supplied wall bracket. One base is required for each battery tower.

This electric cable with a section of 6 mm2 for three-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

VDE and IEC certified cable.

Set of 2 reusable handles for easy handling of the IQ-5P battery.

This single-phase Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid SK-SU and Solax Hybrid X1-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs for 2 Solax outputs and 1 output for a parallel connection to your house grid.

Add this box if you wish to secure your power supply at all times and even in the event of a power outage.

Extend your ABB inverter warranty TRIO-5.8-TL to 10 years.

The WALLBOX power boost measures the power taken from the network, sends the data to the WALLBOX charger so that it regulates the charging power and avoids excessive energy consumption in the home, eliminating any risk of blackout.

BMS module for Growatt battery that works only with Growatt MIN single phase hybrid inverters.

If you have a FRONUIS GALVO SYMO or PRIMO Light version, you can add this card to establish a WIFI connexion.

Buy your communication GATEWAY TIGO ENERGY with CLOUD CONNECT an power supply box at the lowest price online only. This solution enables the communication between smart solar panels and panels with solar optimizers by TIGO TS4. The GATEWAY antenna is set up directly behind the smart solar panels, collects all the data and sends it over via RS485 cables to the CLOUD CONNECT. Thanks to this technology, all your solar panels are completely independent and you can optimize your solar installation’s power output.

The ECU communication gateway is the core of your network. Owners can easily monitor the status of their system using the LCD screen or get information by solar panel via the monitoring software and APS testing.

In addition to controlling the surplus management, you can remotely activate your hot water tank.

Connects directly via RS485 to the LG inverter. You will be able to monitor your home consumption and regulate the power of your solar panels. Measures up to 60A in three-phase.

The Zaptec Sense is designed to make smart use of energy in homes. This system measure the power need and adapt automatically the charging speed to avoid any defaults. Your vehicle can be charged faster when little power is used. The Zaptec Sense avoids overload and power outages when it uses a lot of power.

Measures up to 63A on 3 phases. Also works on single-phase installations (limited to 21A in this case).

BMS module for Growatt battery that works only with Growatt MOD single phase hybrid inverters.

Measure the current of your home with this sensor that plugs around the corresponding power cable.

This meter measures the power injected into electrical grid, consumption of your home. The connexion type is available in the installation instructions at the bottom of this page. 

It measures a voltage from 100V to 380V. Use it for three-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with CT clamps.

This meter measures the power injected into electrical grid, consumption of your home and power from another inverter SOLAX brand or other(dual version). The connexion type is available in the installation instructions at the bottom of this page. 

It measures a voltage from 40V to 400V. Use it for three-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with CT clamps.

Fronius three-phase smart meter 65A-3 monitors the consumption of your home and adjusts the inverter's production. This meter communicates with your Fronius inverter and avoids the injection of surplus from your inverter into the power grid.

Through-current meter, no CT clamp required.

Tool to connect the MULTI-CONTACT solar cable connectors.

This Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid X3-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs for 2 Solax outputs and 1 output for a parallel connection to your house grid.

Add this box if you wish to secure your power supply at all times and even in the event of a power outage.

3-phase measurement solution with SMA wire-speed interface for phase-accurate and netted determination of electrical values (limiting current 63A)

Connects directly to the KOSTAL inverter to monitor your home consumption and regulate the solar panels' power.

The next-generation Envoy-S Metered provides energy usage insights, remote update capabilities and load management, enabling a more cost-effective and reliable solar installation while adding significant value for system owners. "Metered" version.

Including 2 portals with Envoy-S Metered.

Extend your FRONIUS inverter warranty Fronius GEN24 SYMO to 10 years.

The SOLAX Series Box is used to install several towers. It is required for more than a total of 10 batteries to connect the products in series.
Compatible with Solax Triple Power HV-S2.5 and HV-S3.6 batteries.

With the SolaX Series Box, you can add a second battery tower to the X3 IES battery system connected to the inverter.

The Series Box also contains a base for the second battery tower and other necessary accessories such as power and communication cables.

The article is mandatory if you want to use more than 4 batteries in your IES system.

This base is essential if you wish to install the new ENPHASE 5P batteries on the floor.

The BYD Combiner Box centralizes high-voltage battery connections to simplify and secure installations. Compatible with BYD storage systems, it optimizes energy management thanks to built-in protection and easy configuration.

Connect 2 or 3 battery stacks.

If you want more power with your PYLONTECH HV battery, order the Combiner box HV to connect up to 3 additional battery packs to the same inverter. You can therefore increase your battery capacity with this Box.

The Huawei Smart Guard Three-phase is a protection and monitoring device for three-phase photovoltaic installations, mainly for residential and commercial buildings. It enables intelligent energy management by analyzing power production and consumption on all three phases in real time. Compatible with Huawei inverters, it protects against power surges, short-circuits and other network anomalies, guaranteeing system security. Thanks to its advanced connectivity, it offers detailed monitoring via a mobile app, enabling optimized control of the installation. Easy to install, it enhances grid stability, optimizes self-consumption and helps reduce energy costs, while ensuring optimum performance of the photovoltaic system.

The Huawei Smart Guard Single-phase is a protection and monitoring device for residential photovoltaic installations. It ensures intelligent energy management by monitoring electricity production and consumption in real time. Compatible with Huawei inverters, it optimizes self-consumption and protects against power surges, short-circuits and other grid anomalies. Thanks to its advanced connectivity, it enables monitoring via a mobile app, giving users precise control over their installation. Easy to install, it enhances the safety and performance of the photovoltaic system. Its main role is to ensure stable power distribution, contributing to greater energy efficiency and lower electricity bill costs.

Display - LCD
Three-phase display - yes
Frequency - 15...400 Hz
Voltage - 40...700 V
Motor rotation direction tester - no

BMS module and covers for SUNGROW SBR battery

The Huawei Back Up Box is used in a residential rooftop PV plant system to control the inverter grid-tied or off-grid state. When the grid fails, the inverter switches to the off-grid state and supplies power to off-grid loads in backup mode. When the grid recovers, the inverter switches back to the grid-tied state.

The Huawei Back Up Box works with either the LG Chem HV or the new Huawei LUNA 2000 battery modules. The box features a 5kW backup power rating which is more than enough for essential loads.

Heater controller which adjusts the power supplied to the heater based on the available power currently produced by your photovoltaic panels (up to 3 kW).

Heater controller which adjusts the power supplied to the heater based on the available power currently produced by your photovoltaic panels (up to 5 kW).

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Battery management system is required for manage your PylonTech battery serie H1-V2.

If you need more power, the Combiner box HV is made to add up to 6 battery towers.

For SOLAX inverters G4 versions, you can eliminate complex cable connections by using the MATEBOX. This box includes:

- EPS BOX
- Circuit breaker
- CT Clamp

Battery management system is required for manage your TRIPLE POWER battery serie H.

Battery management system for the Solax IES series. X1 or X3. The article is only required once per inverter purchased and is compatible with 1 - 6 batteries.
From 4 batteries, you also need the "Series Box" with an additional floor bracket and the connection box for two battery columns.

Battery management system is required for manage your TRIPLE POWER battery serie HV-S3.6 & HV-S2.5.

The G2 Parallel Box is engineered to augment your battery storage capacity significantly. Its dual-module design not only facilitates convenient expansion but also promotes the extended lifespan of your batteries by alternating usage between modules. This feature is particularly beneficial for growing energy needs, providing a scalable solution that adapts to your requirements.

SMA inverter production recorder (up to 50 units). The SUNNY HOME MANAGER communicates with the inverters via SPEEPDWIRE/Bluetooth link. It transfers all the data for analysis and display to an Internet server or to a local PC (integrated web server). The new version 2.0 of the SUNNY HOME MANAGER allows you to manage your electrical appliances remotely via connected electrical outlets, enable/disable them remotely and analyze your energy balance.

The new Sunny Home Manager 2.0 combines the functions of the Sunny Home Manager Bluetooth and the SMA Energy Meter in one single device.

The SMA Portal will advise you in energy saving via a simple and ergonomic interface. SMA offers this service free of charge.

BMS module and covers for SUNGROW SBH battery

Battery management system is required for manage your PylonTech battery serie H2-V2.

Extend your ABB inverter warranty TRIO-12.5-TL to 10 years.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

The BMS-Parallel Box allows you to increase the storage capacity of your batteries up to 46kWH. You can put 2 battery packs of up to 23kWH in parallel. Each battery pack can have a different number of batteries. For example 2x1, 2x2, 2x3 or 2x4. The two battery packs are operated independently of each other by the parallel BMS and offer a high level of safety in case of battery failure.

T-BAT H 5.8 master batteries are no longer required, as the BMS unit is already integrated in this box.

Therefore, you only need to use the additional TRIPLE POWER battery HV11550 (available in the accessory tab of this product page).

Ideal solution to manage string inverters by SMA (type SunnyBoy or Sunny Tripower). Allows to manage the power output, to integrate sensors (temperature, sunlight, etc.). Equipped with a web server: It can send the data of up to 50 SMA inverters to the online server.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

The G2 Parallel Box is engineered to augment your battery storage capacity significantly. Its dual-module design not only facilitates convenient expansion but also promotes the extended lifespan of your batteries by alternating usage between modules. This feature is particularly beneficial for growing energy needs, providing a scalable solution that adapts to your requirements.

Only the variant for the Triple Power 5.8kWh batteries is currently available.

The Huawei Back Up Box is used in a residential rooftop PV plant system to control the inverter grid-tied or off-grid state. When the grid fails, the inverter switches to the off-grid state and supplies power to off-grid loads in backup mode. When the grid recovers, the inverter switches back to the grid-tied state.

The Huawei Back Up Box works with either the LG Chem HV or the new Huawei LUNA 2000 battery modules. The box features a 5kW backup power rating which is more than enough for essential loads.

High voltage Lithium Iron Phosphate Battery
100% discharge
6.000 cycles or more
Lightweight design
2500 Wh Storage Capacity
2300 W Output Power

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

The Fronius Ohmpilot was originally designed to intelligently control hot water tanks, but it can also be used for infrared heating or towel warmers. In a house, hot water needs can be covered by solar energy from April to October. You optimize your self-consumption, a CO2 reduction emissions and the preservation of the heating system during the summer months.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Extend your ABB inverter warranty TRIO-27.6-TL to 10 years.

Lithium Battery
6 000 Lifecycles
Internet Monitoring
20 year lifespan
3500 Wh Storage Capacity

Module BMS pour batterie Huawei LUNA2000-5-C0 Power Module

For SOLAX inverters G4 versions, you can eliminate complex cable connections by using the MATEBOX. This box includes:

• EPS BOX
• Circuit breaker
• Disconnector
• Meter

Module BMS pour batterie Huawei LUNA2000-5-C0 Power Module

This Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid X3-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs for 2 Solax outputs and 1 output for a parallel connection to your house grid.

Add this box if you wish to secure your power supply at all times and even in the event of a power outage.

This Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid X3-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs for 2 Solax outputs and 1 output for a parallel connection to your house grid.

Add this box if you wish to secure your power supply at all times and even in the event of a power outage.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 12m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 14m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 21m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.