Accessories

Quick and easy installation without any tools. For 4
and 6mm2 cable. No risk:
- Cable breakage
- Induction loop
- Rodents
- Premature ageing of the cable

A specialized tool for safely disconnecting AC trunk ports, ensuring ease of maintenance and system management in SolaX X1 Micro-Inverter installations.

Connector's hood for IQ Enphase micro-inverter. 

To ground your solar panels at home.

This tool allows you to disconnect your IQ Enphase micro-inverter from its connector. It can also be used to tighten the tip termination.

This product is very useful for mounting all Enphase products. 

10x connectors for ⌀6mm ground cable, M8 hole to ground your photovoltaic system.

Male AC plugs designed for secure and efficient connection within SolaX X1 Micro-Inverter systems, ensuring reliable power transmission.

LAN communication card to connect your SOLAX inverter and monitor its performance remotely.

Adapter, patch cable, RJ45. CAT5E
RJ45 M, 2 X RJ45 F, length 0.19 M

1 x RJ45 male to 2 x RJ45 female, 8-pole, 1:1 wiring.

Female AC plugs designed for secure and efficient connection within SolaX X1 Micro-Inverter systems, ensuring reliable power transmission.

SMA battery communication cable 3 metersSMA connection cable for SMA Home Storage batteries.
3 meters long
Suitable for outdoor installation.

Tool to connect the MULTI-CONTACT solar cable connectors.

Use this connector from TRONC for SOLAX X1 microinverters to connect AC cables and microinverters. You have one side with a male end and the other female end. The 3rd is the end piece for connecting the SOLAX microinverter connector.

Multi-contact MC4 connectors for connecting solar panels. Connect one string with 1 cable.

Multi-contact MC4 connectors for connecting solar panels

This tool allows you to disconnect your IQ Enphase micro-inverter from its connector. It can also be used to tighten the tip termination.

This product is very useful for mounting all Enphase products. 

The connectors are located 1.3m apart from eachother in portrait mode. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of Enphase micro-inverters you have ordered.

This solution is ready to use.

4-pin shielded cable Li2YCYv for RS485 cabling, 10 meters (indoor and outdoor)

Female connector for IQ Enphase micro-inverter. 

Male connector for IQ Enphase micro-inverter. 

Cable duct with a length of 2m, white color with a dimension of 60x40mm. This duct allows you to pass up to 16 cables. Be careful, you must not mix solar cables (DC direct current) and alternating cables (AC alternating current) in the same duct.

MC4 multi-contact brand connectors for connection to solar panels and for SOLAX battery. This MC4 variant has a sealing ring.

Connectors MC4 for connecting solar panels

This MC4 variant has a sealing ring.

Termination cap APS for the last micro-inverter. 

This tip of ending is completely sealed and waterproof. Be careful when you attach this piece to your IQ Enphase cable: you can only remove it by cutting. Make sure you order the right cable length.

Proper installation with our Enphase products. 

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

The connectors are located 2m apart from eachother. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of APS micro-inverters you have ordered.

This solution is ready to use.

10x multi-contact connectors MC4 for connecting solar panels

The wood construction screws plate head have a 10-fold higher corrosion protection due to their Wirox surface.

In addition, a corrugated profile right up to the tip ensures quick and easy screwing in. The screws can be screwed in without pre-drilling. Screws pan head saves up to 30% time and money compared to alternative pan head screws. The pan head guarantees high head pull-through values, thus enabling larger screw spacing. The T-Star Plus drive ensures a clean fit of the bit. The screws are marked on the head with the length and manufacturer's identification. Free static calculation software is also available.

10x multi-contact connectors MC4 for connecting solar panels.

Measure the electricity in your home with this sensor, which is connected between your home's electricity box and your electricity supplier's meter.
This product is suitable for the Solax X1 Mini and Boost series.

Here you can find the suitable cable with a length of 5m for the APS EZ1. It is needed to connect the EZ1 to the mains. You can also connect another socket by disconnecting the type C plug.

Length 1.3 meters
Three-phase