Buy your ENPHASE ENCHARGE 3T with 3.5kWh battery at the lowest price - online only. This battery has an expected lifetime of 14 years with more than 3600 cycles. This is equivalent to 250 to 350 cycles per year on average. In addition, the ENPHASE domestic batteries allow a discharge rate of up to 80%. You get a much greater storage capacity than with lead batteries. By connecting the ENPHASE Lithium batteries to your solar panels + Enphase micro-inverters, you obtain a storage of 3500 Wh.
Requires ENPHASE comms-KIT for ENCHARGE.
Lithium battery: The ENPHASE Battery is a lithium battery. The advantage over lead particularly lies in a more efficient charge / discharge cycle. In addition, the materials used are less hazardous to the environment.
80% of discharge: This battery offers you a discharge of 80%. You have a capacity of 3500 Wh that you can unload to up to 2800 Wh.
Number of cycles: 3600: The long life cycle of this battery makes it ideal for long term use. With an average of 250 cycles per year, the domestic ENPHASE battery has an estimated lifetime of 14 years.
Lightweight and design: The ENPHASE 3.5kWH domestic battery weighs 40kg. Its simple and narrow design will allow you to install it easily at home. Operating temperatures from -15°C to 55°C guarantee optimum use in every location.
Capacity of storage: 3500 Wh: This battery has a capacity of 3500 Wh. This equates to 3500 W for a period of 1 hour. If this is not sufficient, you can purchase these same batteries multiple times and enhance the capacity of your installation further.
Output power: 1275 W: The domestic ENPHASE battery has an instant power of up to 1275 W. You can increase your installation's output power further by purchasing more than one battery
The next-generation Envoy-S Metered provides energy usage insights, remote update capabilities and load management, enabling a more cost-effective and reliable solar installation while adding significant value for system owners. "Metered" version. Including 2 portals with Envoy-S Metered.
The Enphase COMMS kit is required to establish the data connection between the Encharge storage units and the Enphase Envoy. The data connection runs via Zigbee. It is connected to the Envoy via USB. Including repeater for bridging longer distances between Encharge and Envoy. Only one COMMS kit is required per system, regardless of the number of batteries.