Prices drop

4-pin shielded cable Li2YCYv for RS485 cabling, 10 meters (indoor and outdoor)

50 meter ground cable 8UL1015 green/yellow 6 mm²

Cable 1x4 mm² photovoltaic CR 100 m

Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V

Cable 1x6 mm² photovoltaic CR 100 m

Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V

The wood construction screws plate head have a 10-fold higher corrosion protection due to their Wirox surface.

In addition, a corrugated profile right up to the tip ensures quick and easy screwing in. The screws can be screwed in without pre-drilling. Screws pan head saves up to 30% time and money compared to alternative pan head screws. The pan head guarantees high head pull-through values, thus enabling larger screw spacing. The T-Star Plus drive ensures a clean fit of the bit. The screws are marked on the head with the length and manufacturer's identification. Free static calculation software is also available.

10x multi-contact connectors MC4 for connecting solar panels.

10x multi-contact connectors MC4 for connecting solar panels

Advantages of product :

To fix your profile to the hooks. Batch of 10.

Advantages of product :

To fix your profile to the hooks. Batch of 10.

ESDEC rails are manufactured from high-quality extruded aluminum, offering optimum rigidity and excellent corrosion resistance. Their streamlined design incorporates channels for rapid attachment of photovoltaic modules and junction connectors. Lightweight and sturdy, they guarantee durable, standard-compliant installation.

Electrical conduit for outdoor installation. You can run up to 8 wires inside. Be careful not to mix solar cables (direct current) and alternating current cables. Supplied with the wire puller to facilitate the installation of your cables indoors.

Tool to connect the MULTI-CONTACT solar cable connectors.

4-pin shielded cable Li2YCYv for RS485 cabling, 30 meters (indoor and outdoor)

This electric cable with a section of 2.5mm2 for single-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

Cable is VDE and IEC certified.

This electric cable with a section of 4mm2 for single-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

Cable is VDE and IEC certified.

This electric cable with a section of 6 mm2 for single-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

Cable is VDE and IEC certified.

This electric cable with a section of 2.5 mm2 for three-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

VDE and IEC certified cable.

This electric cable with a section of 4 mm2 for three-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

VDE and IEC certified cable.

This electric cable with a section of 6 mm2 for three-phase networks over a length of 30m. You must connect to the output of your inverter to your electrical panel. It can be installed in the air, underground, in water, in concrete, indoors, in cable ducts, etc.

VDE and IEC certified cable.

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Management Excess solar power into the grid
Single-phase inverter

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 12m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 14m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 21m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Order your tools at the best price to mount your solar panels on your customers' roofs. This system can go up to 10m high. Supplied with a forklift trolley or support for placing the solar panels, you'll have the flexibility you need for your installation.

The system's variable-speed electric motor ensures that your panels go up smoothly. The system is highly flexible and adapts perfectly to different roofs.

Cable 1x4 mm² photovoltaic CR 100 m

Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V

Cable 1x4 mm² photovoltaic CR 100 m

Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V

5-pole terminal block Pollman

Cable cross-section:

10 x 1.5 - 25 mm²

10 x 1.5 - 35 mm² cable

- Model name: F204 A-63/0.03
- No. of poles: 4
- Protection Current: 63 A, 30mA
- Rated voltage: 230 / 400 V
- Device type: Earth leakage circuit breaker
- Characteristic: Type A

Connects directly via RS485 to the LG inverter. You will be able to monitor your home consumption and regulate the power of your solar panels. Measures up to 60A in three-phase.

- Model name: F204 A-40/0.03
- Number of poles: 4
- Protection current: 40 A, 30mA
- Rated voltage: 230 / 400 V
- Device type: differential circuit breaker
- Characteristic: Type A

- Model name: F204A-40/0,3
- No. of poles: 4
- Protection Current: 4 kV 300 mA
- Rated voltage: 230 / 400 V
- Device type: Earth leakage circuit breaker
- Characteristic: Type A

- Model name: F204A-63/0,3, 63A/0,3mA
- No. of poles: 4
- Protection Current: 300 mA
- Rated voltage: 230 / 400 V
- Device type: earth leakage circuit breaker
- Charaistic: Type A

Control and immediate monitoring of your installations by connecting to your network ! 

- Model name: S200M-B63
- Number of poles: 3
- Protection current: 63A 440V
- Rated voltage: 230 / 400 V
- Device type: Miniature circuit breaker
- Characteristic : Type B

- Model name: S201M-B10
- Number of poles: 1
- Protection current: 10A 10kA
- Rated voltage: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-B16
- Number of poles: 1
- Protection current: 16A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-B20
- Number of poles: 1
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-B25
- Number of poles: 1
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-B32
- Number of poles: 1
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-B40
- Number of poles: 1
- Protection current: 40A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-B50
- Number of poles: 1
- Protection current: 50A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-B63
- Number of poles: 1
- Protection current: 63A 10kA
- Voltage rating: 230 / 400 V
- Device type: Circuit breaker
- Characteristic : Type B

- Model name: S201M-C10
- Number of poles: 1
- Protection current: 10A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- S201M-C16 circuit breaker

- Trip characteristic C

- 35 mm² conductor cross-section

- Dimensions: 17.5mm x 88mm x 69mm

- Model name: S201M-C20
- Number of poles: 1
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S201M-C25
- Number of poles: 1
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S201M-C32
- Number of poles: 1
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S201M-C40
- Number of poles: 1
- Protection current: 40A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S201M-C50
- Number of poles: 1
- Protection current: 50A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S201M-C63
- Number of poles: 1
- Protection current: 63A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S203M-B10
- Number of poles: 3
- Protection current: 10A 10kA
- Rated voltage: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S203M-B16
- Number of poles: 3
- Protection current: 16A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S203M-B20
- Number of poles: 3
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S203M-B25
- Number of poles: 3
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S203M-B32
- Number of poles: 3
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- S203M-B40 circuit breaker

- 35 mm² conductor cross-section

- 440 V AC rated voltage

- Model name: S203M-B6
- Number of poles: 3
- Protection current: 6A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Type B

- Model name: S203M-C10
- Number of poles: 3
- Protection current: 10A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S203M-C16
- Number of poles: 3
- Protection current: 16A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S203M-C20
- Number of poles: 3
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S203M-C25
- Number of poles: 3
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type: Circuit breaker
- Characteristic : Type C

- Model name: S203M-C32
- Number of poles: 3
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S203M-C40
- Number of poles: 3
- Protection current: 40A 10kA
- Voltage rating: 230 / 400 V
- Device type: Circuit breaker
- Characteristic : Type C

- Model name: S203M-C50
- Number of poles: 3
- Protection current: 50A 10kA
- Voltage rating: 230 / 400 V
- Device type : Miniature circuit breaker
- Characteristic : Type C

- Model name: S203M-C6
- Number of poles: 3
- Protection current: 6A 10kA
- Rated voltage: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S203M-C63
- Number of poles: 3
- Protection current: 63A 10kA
- Voltage rating: 230 / 400 V
- Device type: Miniature circuit breaker
- Characteristic : Type C

- Model name: S751DR-E100
- Number of poles: 1
- Protection current: 100A 25kA
- Voltage rating: 230V
- Device type : Selective main line circuit breaker

- Model name: S751DR-E100
- Number of poles: 1
- Protection current: 80A 25kA
- Voltage rating: 230V
- Device type : Selective main circuit breaker

- Model name: S751/3-E40
- Number of poles: 3
- Protection current: 35A 25kA
- Rated voltage: 230V / 400V
- Device type: Selective main circuit breaker

- Model name: S751/3-E40
- Number of poles: 3
- Protection current: 40A 25kA
- Rated voltage: 230V / 400V
- Device type : Selective main circuit breaker

- Model name: S751/3DR-E40
- Number of poles: 3
- Protection current: 50A 25kA
- Voltage rating: 230V / 400V
- Device type: Selective main circuit breaker

- Model name: S751/3DR-E40
- Number of poles: 3
- Protection current: 63A 25kA
- Voltage rating: 230V / 400V
- Device type: Selective main circuit breaker

- Model name: S751/3DR-E40
- Number of poles: 3
- Protection current: 35A 25kA
- Voltage rating: 230V / 400V
- Device type: Selective main circuit breaker

- Model name: S751/3DR-E40
- Number of poles: 3
- Protection current: 40A 25kA
- Voltage rating: 230V / 400V
- Device type: Selective main circuit breaker

- Model name: S753DR-E100
- Number of poles: 3
- Protection current: 100A 25kA
- Voltage rating: 400 V
- Device type: Selective main line circuit breaker

- Model name: S753DR-E80
- Number of poles: 3
- Protection current: 80A 25kA
- Voltage rating: 400 V
- Device type: Selective main line circuit breaker

- Model name: OVR T2 3N 40-275 P QS
- No. of poles: 3N
- Protection Current: 100 kA
- Rated voltage: 230 / 400 V
- Device type: Protective device
- Charaistic: Type 2

With this card, the ABB inverter will automatically adapt the output power in order to maximise self-consumption or in order to avoid feeding power into the grid according to the system settings.

In addition, this UNO-DM-COM KIT is equipped with a configurable switching relay which can be used for manage external loads with custumizable activation power and temporal thresholds (basic load management capability).

The ABB inverter can be easily integrated with third party monitoring and control systems using this accessory board.

Extend your ABB inverter warranty TRIO-12.5-TL to 10 years.

Extend your ABB inverter warranty TRIO-27.6-TL to 10 years.

Extend your ABB inverter warranty TRIO-5.8-TL to 10 years.

Electrical box (alternative current, triphase) for photovoltaic protection. Cabinet includes the wiring diagram. Required for each photovoltaic system.

AC box 400 V AC 3-phase AC up to 20 kW with differential circuit breaker 32 A - 300 mA + surge arrester type A.

Electrical box (alternative current) for photovoltaic protection. Cabinet including wiring diagram. Required for each photovoltaic system.

AC box 230 V AC single-phase up to 4 kW with differential circuit breaker 16 A - 30 mA + surge arrester type A.

Electrical box (alternative current 3-phase) for photovoltaic protection. Cabinet includes the wiring diagram. Required for each photovoltaic system.

AC box 400 V AC 3-phase AC up to 10 kW with differential circuit breaker 16 A - 30 mA + surge arrester type A.

Electrical box (alternative current 3-phase) for photovoltaic protection. Cabinet includes the wiring diagram. Required for each photovoltaic system.

AC box 400 V AC 3-phase AC up to 10 kW with differential circuit breaker 16A B-Typ - 30 mA + surge arrester type A.

Box for installation with inverter that manages the batteries.

Electrical box (alternative current, 3-phase) for photovoltaic protection. Cabinet includes wiring diagram. Required for each photovoltaic system.

AC box 400 V AC 3-phase AC 20 to 40kW with differential circuit breaker 63 A - 300 mA + surge arrester type A.

Electrical box (alternative current) for photovoltaic protection. Cabinet includes the wiring diagram. Required for each photovoltaic system.

AC box 230 V AC single-phase up to 6 kW with differential circuit breaker 32 A - 30 mA + surge arrester type A.

Electrical box (alternative current) for photovoltaic protection. Cabinet includes the wiring diagram. Required for each photovoltaic system.

AC enclosure 5-6kW IP65 single phase 230VAC 32A differential circuit breaker 30mA typeB-APR + Surge arrester type 2.
.

Enclosure for installation with battery only.

Plastic enclosure 12M, 246x310x148mm

Electrical box (alternative current 3-phase) for photovoltaic protection. Cabinet includes the wiring diagram. Required for each photovoltaic system.

AC box 400 V AC 3-phase AC up to 20 kW with differential circuit breaker 32A B-Typ - 30 mA + surge arrester type A.

Box for installation with inverter that manages the batteries.

Electrical box (alternative current) for photovoltaic protection. Cabinet includes the wiring diagram. Required for each photovoltaic system.

AC box 230 V AC single-phase up to 10 kW with differential circuit breaker 50A - 30 mA + surge arrester type A.

Electrical box (alternative current) for photovoltaic protection. Cabinet includes the wiring diagram. Required for each photovoltaic system.

AC enclosure 5-6kW IP65 single phase 230VAC 50A 30mA differential circuit breaker type B-APR + Lightning arrester type 2.

Enclosure for installation with battery only.

Plastic enclosure 12M, 246x310x148mm

Accessories for TRIPLE POWER batteries including:
- Cover to put the H9-H12 batteries in 2 columns
- Cables between the 2 columns
- Screws

The connectors are located 2.4m apart from eachother. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of APS QT2 micro-inverters you have ordered.

This solution is ready to use.

The connectors are located 2m apart from eachother. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of APS micro-inverters you have ordered.

This solution is ready to use.

Here you can find the suitable cable with a length of 5m for the APS EZ1. It is needed to connect the EZ1 to the mains. You can also connect another socket by disconnecting the type C plug.

Buy your micro-inverter APS DS3 directly on our online webshop. The micro-inverter APS specification is allows a connexion for 2 solar panels on the same micro-inverter. It optimizes solar panels production and become them completely independent from each orders. With this new technology, you reduce the number of micro-inverter and moreover you optimize profitability: More performance and less expensive.

You must order the APS cable to connect the micro-inverters to each other.

Buy your micro-inverter APS DS3-L directly on our online webshop. The micro-inverter APS specification is allows a connexion for 2 solar panels on the same micro-inverter. It optimizes solar panels production and become them completely independent from each orders. With this new technology, you reduce the number of micro-inverter and moreover you optimize profitability: More performance and less expensive.

You must order the APS cable to connect the micro-inverters to each other.

Buy your APS EZ1 micro inverter directly from our online store. The great special feature of this APS micro inverter is that it can connect 2 solar modules. They optimize the production of the two solar modules and yet make them completely independent of each other. Thanks to this new technology, you can reduce the number of micro-inverters and optimize profitability: more power and lower costs. With the EZ1 model, monitoring is already integrated and the inverter can be controlled via Wifi or Bluetooth.
A maximum of 2 units can be connected in series.

Buy your APS QT2 three-phase microinverter directly from our online store. The great feature of this APS microinverter is that it allows you to connect 4 solar panels to 2 independent inputs. It optimizes solar panels production and become them completely independent from each orders. With this new technology, you reduce the number of micro-inverter and moreover you optimize profitability: More performance and less expensive.

You must order the APS cable to connect the micro-inverters to each other.

10x connectors for ⌀6mm ground cable, M8 hole to ground your photovoltaic system.