Home

Quick and easy installation without any tools. For 4
and 6mm2 cable. No risk:
- Cable breakage
- Induction loop
- Rodents
- Premature ageing of the cable

Finalize your installation with the I'M SOLAR plastic tips that you put on I'M SOLAR profiles.

Use these clamps with I'M SOLAR triangles. Only for horizontal use.

Renusol VS+ is suitable for nearly all types of pitched roofs in Europe. The reasonable choice of roof hooks allows the installation in the roof with the most diverse roof covering materials and substructures. Two mounting rails for medium and high load. Module clamps adjustable for different frame heights. Patented – one clamp for middle and end clamping.

ESDEC end cap to secure the termination flange. This tip slides into the ESDEC rail.

A specialized tool for safely disconnecting AC trunk ports, ensuring ease of maintenance and system management in SolaX X1 Micro-Inverter installations.

Install your solar panels on your blacon with these clamps on the balcony bar.
Please note that you need to take the blacon hooks and the blacon bar to ensure the installation of your panel. Please refer to the accessories tab on this product page.

I'M SOLAR middle clamp (old generation) that works for solar panels with a thickness of 31 - 50 mm.

Complete system ready to be installed. You need 3 clips per Falx block.

I'M SOLAR single clamp (old generation) that works for solar panels with a thickness of 31 - 50 mm.

Fix your solar panels with a thickness from 30 to 40 mm with black I'M SOLAR middle clamps. The I'M SOLAR mounting system is adaptable for all solar panels.

Connector's hood for IQ Enphase micro-inverter. 

To ground your solar panels at home.

Fasten your solar panels with I'M SOLAR's simple black clamps for panel thicknesses from 30 mm to 40 mm. The I'M SOLAR fastening system is suitable for all solar panels.

Fasten your solar panels with I'M SOLAR single clamps for panel thicknesses from 30 mm to 40 mm. The I'M SOLAR fastening system is suitable for all solar panels.

This tool allows you to disconnect your IQ Enphase micro-inverter from its connector. It can also be used to tighten the tip termination.

This product is very useful for mounting all Enphase products. 

10x connectors for ⌀6mm ground cable, M8 hole to ground your photovoltaic system.

Fix your solar panels with a thickness from 30 to 30 mm with I'M SOLAR middle clamps. The I'M SOLAR mounting system is adaptable for all solar panels.

Advantages of product :

To fix your profile to the hooks. Batch of 10.

- Model name: S201M-B16
- Number of poles: 1
- Protection current: 16A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

Renusol RS1 clamp

A single module clamp for all module frame heights from 30 to 50 mm and all functions (clamping in the middle and at the end with a single type of clamp; to do this, simply turn the clamping head 90°). You no longer need a single flange or double flange, this flange allows both functions. So you get fewer parts for assembly and therefore a faster installation. Silver color. Clamping base compatible with all Renusol rails.

ESDEC rail connectors allow 2 rails to be fastened together for a more solid installation.

- Model name: S201M-B10
- Number of poles: 1
- Protection current: 10A 10kA
- Rated voltage: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

Fix your solar panels directly on the nail top using these I'M SOLAR clamps.

Hanger bolts for installing your solar panels on corrugated iron, fiber-cement, etc. Hanger bolt M10 x 300mm.

ESDEC ClickFIT EVO clamp: A single clamp for all module frame heights from 30 to 50 mm and all functions (clamping in the middle and at the end with a single type of clamp; to do this, simply turn the clamping head 90°). This means fewer parts for assembly, and faster installation. These clamps are compatible with ESDEC brand rails.

Install your solar panels on steel decks using this I'M SOLAR mounting bracket. Only for horizontal use.

Male AC plugs designed for secure and efficient connection within SolaX X1 Micro-Inverter systems, ensuring reliable power transmission.

LAN communication card to connect your SOLAX inverter and monitor its performance remotely.

Install your solar panels on your blacon with these hooks attached behind the panel. Please note that you need to take the blacon clamps and the blacon bar to ensure the installation of your panel. Please refer to the accessories tab on this product page.

- Model name: S201M-B20
- Number of poles: 1
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

Adapter, patch cable, RJ45. CAT5E
RJ45 M, 2 X RJ45 F, length 0.19 M

1 x RJ45 male to 2 x RJ45 female, 8-pole, 1:1 wiring.

Advantages of product :

To fix your profile to the hooks. Batch of 10.

Female AC plugs designed for secure and efficient connection within SolaX X1 Micro-Inverter systems, ensuring reliable power transmission.

Article Number: 262616
EAN: 4011923099176
Strap Length: 203 mm
Strap Width: 4.6 mm
Max. Bundle Diameter: 52 mm
Min. Holding Force: 22 N
Color: Black
Material: Plastic
Operating Temperature: -40 - 85 °C
Mounting Temperature: -5 - 85 °C
Material Quality: Polyamide PA
Packaging Unit: 100 pieces

This is a UV-resistant cable tie, perfect for use under constant UV exposure.

- Model name: S201M-B32
- Number of poles: 1
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-B25
- Number of poles: 1
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-C20
- Number of poles: 1
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- S201M-C16 circuit breaker

- Trip characteristic C

- 35 mm² conductor cross-section

- Dimensions: 17.5mm x 88mm x 69mm

SMA battery communication cable 3 metersSMA connection cable for SMA Home Storage batteries.
3 meters long
Suitable for outdoor installation.

Extend the I'M SOLAR profiles with these rail connectors. Simply slide them directly on to the 2 profiles to make the junction.

Install your solar panels on steel decks using this I'M SOLAR mounting bracket. Only for vertical use. Wave hight variation 375 mm max.

- Model name: S201M-C25
- Number of poles: 1
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S201M-C10
- Number of poles: 1
- Protection current: 10A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

Tool to connect the MULTI-CONTACT solar cable connectors.

Use this connector from TRONC for SOLAX X1 microinverters to connect AC cables and microinverters. You have one side with a male end and the other female end. The 3rd is the end piece for connecting the SOLAX microinverter connector.

Complete system ready to be installed. Rail length 1411mm.

Renusol RS1 clamp

A single module clamp for all module frame heights from 30 to 50 mm and all functions (clamping in the middle and at the end with a single type of clamp; to do this, simply turn the clamping head 90°).You no longer need a single flange or double flange, this flange allows both functions. So you get fewer parts for mounting and therefore a faster installation. Black color for solar panel with black frame. Clamping base compatible with all Renusol rails.

ESDEC ClickFit EVO fiber cement fastener is a reliable solution for installing solar panels on fiber cement roofs. Designed to respect the integrity of this type of roofing, it offers a solid, durable fastening adapted to the most demanding climatic conditions. Made from high-quality materials, it guarantees safe installation while simplifying the installation process. Thanks to its ergonomic design, this fastener reduces installation time and ensures harmonious integration of the panels.

Install your solar panels on your blacon with these hooks attached behind the panel. Please note that you need to take the blacon clamps and the blacon bar to ensure the installation of your panel. Please refer to the accessories tab on this product page.

The bar attaches diagonally to the back of 2 I'M SOLAR triangles. Length: 1.75m.

Multi-contact MC4 connectors for connecting solar panels. Connect one string with 1 cable.

Multi-contact MC4 connectors for connecting solar panels

This tool allows you to disconnect your IQ Enphase micro-inverter from its connector. It can also be used to tighten the tip termination.

This product is very useful for mounting all Enphase products. 

Complete system ready to be installed. Rail length 1523mm.

Complete system ready to be installed. Rail length 2139mm

- Model name: S201M-B40
- Number of poles: 1
- Protection current: 40A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

The ESDEC tile hook is a stainless steel or aluminum fastener optimized for pitched tile roofs. It features an adjustable base and pivoting arm to adapt to variations in batten height. Its design guarantees even distribution of mechanical loads and enhanced resistance to climatic stress, while preserving the structural integrity of the tiles.

- Model name: S201M-C32
- Number of poles: 1
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

The ESDEC ClickFit EVO slate hook is specially designed for slate roofs, offering a reliable and durable solution for the installation of solar panels. Thanks to its innovative design, it adapts perfectly to slate surfaces without damaging them. Made from robust materials, it is weather-resistant and guarantees secure panel attachment. Quick and easy to install, this hook considerably reduces installation time while ensuring a solid, efficient installation.

Complete system ready to be installed. Rail length 2035mm.

The connectors are located 1.3m apart from eachother in portrait mode. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of Enphase micro-inverters you have ordered.

This solution is ready to use.

- Model name: S201M-B50
- Number of poles: 1
- Protection current: 50A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S201M-C40
- Number of poles: 1
- Protection current: 40A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

The Renusol Slate Hook is suitable for almost all types of pitched roofs in Europe with Slate tiles. This hook allows you to install it on your roof with the most diverse roofing materials and substructures. You attach your RENUSOL rail directly to it. The solar panels are placed on the rails.

4-pin shielded cable Li2YCYv for RS485 cabling, 10 meters (indoor and outdoor)

Female connector for IQ Enphase micro-inverter. 

Male connector for IQ Enphase micro-inverter. 

The TrussHook tile roof hook, compatible with the ESDEC ClickFit EVO system, offers a reliable and efficient solution for the installation of solar panels. Specifically designed for tiled roofs, it guarantees a sturdy fastening while preserving the integrity of the roof. Made from durable materials, it withstands extreme weather conditions and ensures optimum longevity. Easy to install thanks to its intuitive design, the TrussHook reduces installation time and ensures perfect alignment of solar panels.

- Product Type: ZK81P5 Connecting Cable 35sqmm

- Net Weight: 0.229 kg

- Package Dimensions: 145x110x20 mm

I'M SOLAR hook for the installation of solar modules on roofs with all types of tiles.

Cable duct with a length of 2m, white color with a dimension of 60x40mm. This duct allows you to pass up to 16 cables. Be careful, you must not mix solar cables (DC direct current) and alternating cables (AC alternating current) in the same duct.

I'M SOLAR hook for the installation of solar modules on roofs with Marseille tiles.

MC4 multi-contact brand connectors for connection to solar panels and for SOLAX battery. This MC4 variant has a sealing ring.

Connectors MC4 for connecting solar panels

This MC4 variant has a sealing ring.

Termination cap APS for the last micro-inverter. 

The Renusol hook for all 90° tiles allows you to fix the RENUSOL rails in the direction of the slope of your roof and therefore install your solar panels horizontally (landscape format). This hook is suitable for almost all types of sloping roofs in Europe and therefore all types of tiles thanks to its multiple adjustment possibilities. You fix your RENUSOL rail directly on it. The solar panels are placed on the rails.

I'M SOLAR hook for the installation of solar modules on roofs with Marseille tiles.

I'M SOLAR hook for the installation of solar panels on roofs with flat tiles.

I'M SOLAR hook for the installation of solar panels on roofs with slate tiles.

- Model name: S201M-B63
- Number of poles: 1
- Protection current: 63A 10kA
- Voltage rating: 230 / 400 V
- Device type: Circuit breaker
- Characteristic : Type B

This tip of ending is completely sealed and waterproof. Be careful when you attach this piece to your IQ Enphase cable: you can only remove it by cutting. Make sure you order the right cable length.

Proper installation with our Enphase products. 

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

The Renusol hook for flat tiles is suitable for almost all types of pitched roofs in Europe and therefore for flat tiles. This hook allows you to install on your roof equipped with flat tiles with the most diverse roofing materials and substructures. You attach your RENUSOL rail directly to it. The solar panels are placed on the rails.

- Model name: S201M-C50
- Number of poles: 1
- Protection current: 50A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

- Model name: S201M-C63
- Number of poles: 1
- Protection current: 63A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

- Model name: S203M-B16
- Number of poles: 3
- Protection current: 16A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

The connectors are located 2m apart from eachother. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of APS micro-inverters you have ordered.

This solution is ready to use.

- Model name: S203M-B10
- Number of poles: 3
- Protection current: 10A 10kA
- Rated voltage: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

• Bulb connected via the ALMA SOLAR application
• Standard E27 socket
• Power of 9W with possibility of choosing warm/cold white/colors
• Brightness management
• Wifi connection
• Monitoring your own consumption

10x multi-contact connectors MC4 for connecting solar panels

The Renusol All-Tile Hook is suitable for almost all types of pitched roofs in Europe and all types of tiles. Indeed, it is adjustable and therefore allows the greatest flexibility to meet all types of tiles. This hook allows you to install it on your roof with the most diverse roofing materials and substructures. You fix your RENUSOL rail directly to it. The solar panels are placed on the rails.

Install your solar panels with the I'M SOLAR fixing rails with 2,40 m length. Simply fasten to the hooks with hammer head nuts. The clamps keep the rails and solar panels on your roof.

The wood construction screws plate head have a 10-fold higher corrosion protection due to their Wirox surface.

In addition, a corrugated profile right up to the tip ensures quick and easy screwing in. The screws can be screwed in without pre-drilling. Screws pan head saves up to 30% time and money compared to alternative pan head screws. The pan head guarantees high head pull-through values, thus enabling larger screw spacing. The T-Star Plus drive ensures a clean fit of the bit. The screws are marked on the head with the length and manufacturer's identification. Free static calculation software is also available.

Length: 10 mm
Color range: French color code
Cross section: 4mm²
Color: Orange
1 article corresponds to a pack of 100 ferrules

Length: 10 mm
Color palette: DIN color code
Cross section: 4mm²
Color: Grey
1 item corresponds to a pack of 100 ferrules

- Model name: S203M-B20
- Number of poles: 3
- Protection current: 20A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S203M-C16
- Number of poles: 3
- Protection current: 16A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

• Reduced dimensions and improved design
• Flexible stand and wall sticker included
• Includes a temperature sensor and a light sensor
• Control via SHELLY application
• Connection via Wifi
• Battery included with lifespan 5 years, recharge by cable

ESDEC rails are manufactured from high-quality extruded aluminum, offering optimum rigidity and excellent corrosion resistance. Their streamlined design incorporates channels for rapid attachment of photovoltaic modules and junction connectors. Lightweight and sturdy, they guarantee durable, standard-compliant installation.

10x multi-contact connectors MC4 for connecting solar panels.

- Model name: S203M-B25
- Number of poles: 3
- Protection current: 25A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

- Model name: S203M-B6
- Number of poles: 3
- Protection current: 6A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Type B

- Product Type: CA36V Distributor

- Dimensions: 950 x 800 x 160 mm

Measure the electricity in your home with this sensor, which is connected between your home's electricity box and your electricity supplier's meter.
This product is suitable for the Solax X1 Mini and Boost series.

Here you can find the suitable cable with a length of 5m for the APS EZ1. It is needed to connect the EZ1 to the mains. You can also connect another socket by disconnecting the type C plug.

- Model name: S203M-B32
- Number of poles: 3
- Protection current: 32A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type B

Length 1.3 meters
Three-phase

• Detects and signals the opening/closing of doors/windows
• Measurement of brightness and tilt angle
• 1 x 3V CR2032 battery supplied with lifespan of up to 5 years
• SHELLY integration, your home protection
• Intelligent management based on the status of other connected devices

The connectors are located 2m apart from eachother in portrait mode. The quantity you select refers to the number of connectors. The connectors are already mounted on the cable. Of course this number is linked to the number of Enphase micro-inverters you have ordered.

This solution is ready to use.

Holds up to 70 kg

5-pole terminal block Pollman

Cable cross-section:

10 x 1.5 - 25 mm²

10 x 1.5 - 35 mm² cable

- Model name: S203M-C10
- Number of poles: 3
- Protection current: 10A 10kA
- Voltage rating: 230 / 400 V
- Device type : Circuit breaker
- Characteristic : Type C

Order your RENUSOL rail with a length of 2.25m (total dimensions 50 x 37 x 2250mm) to fix your solar panels. You can use only the RENUSOL fixing hooks as well as the RENUSOL VS+ clamps with these rails.