Accessories

---

5 reviews

Connects directly to the solar inverter to monitor your home consumption and regulate the solar panels' power. Measures up to 100 A.

4 reviews

Accessories for TRIPLE POWER batteries including:- Cover to put the H9-H12 batteries in 2 columns- Cables between the 2 columns- Screws

Connection for SMA and FRONIUS up to 150A. Length 0.5m.

Connects directly to the solar inverter to monitor your home consumption and regulate the solar panels' power. Measures up to 250 A.

6 reviews

Cable 1x4 mm² photovoltaic CR 100 m Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V

Zigbee range extender dongle operating in 2.4GHz band for the Enphase IQ Battery To be used in specific conditions (not mandatory) specified in installation manual

1 review

Cable 1x6 mm² photovoltaic CR 100 m Operation from -50 ° C to 150 ° C / Maximum voltage: 1,000 V

4 reviews

External Relay for IQ7 In Enphase installations three-phase, the Q Relay (Network System Relay Controller) acts as a physical disconnect relay controller for installations.

Fronius three-phase smart meter 65A-3 monitors the consumption of your home and adjusts the inverter's production. This meter communicates with your Fronius inverter and avoids the injection of surplus from your inverter into the power grid. Through-current meter, no CT clamp required.

The Enphase Envoy communications gateway is the core of your network. Homeowners can easily monitor the status of their system using the LCD screen of the Envoy and get more detailed information for each module via Enlighten, the monitoring and analysis software by Enphase. WIFI directly included in this ENVOY-S gateway.

1 review

This single-phase Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid SK-SU and Solax Hybrid X1-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs...

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

7 reviews

50 meter ground cable 8UL1015 green/yellow 6 mm²

The Modbus SolarEdge meter is used for photovoltaic supervision, consumption monitoring at home and for monitoring the power grid. The meter measures currents from 50 A to 1,000 A and supports residential and commercial installations. The meter connects to the SolarEdge inverter or gateway control and communication via RS485.