Prices drop

WIFI internet monitoring
Integrated battery management low voltage
SolarEdge SetApp application on your smartphone
Three phase inverter

Heater controller which adjusts the power supplied to the heater based on the available power currently produced by your photovoltaic panels (up to 3 kW).

Heater controller which adjusts the power supplied to the heater based on the available power currently produced by your photovoltaic panels (up to 5 kW).

Measure the current of your home with this sensor that plugs around the corresponding power cable.

The SolaX adapter box is combined with a heat pump with dry contact function.
As long as your appliance has a dry contactor, this box allows your appliance to be connected to the photovoltaic inverter. The inverter controls the box to activate your heater according to your settings (available panel power, battery status, time, etc.).

Typically customers activate when there is excess solar energy and battery storage capacity. This part of the energy can be used to activate the heat pump or cumulus in the required temperature range.

Note: The adapter box is only compatible with SolaX Hybrid G4 and Boost G4 models. 

The ECC gateway connects your microinverters to the Solax cloud application, enabling you to retrieve and manage all the information from your microinverters.

Domestic and professional use
Management with solar panels
Programmable activation
Management of multiple chargers
Connected to internet
Power 11kW (3P)
Three phase connection

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

Immediately cost-effective
Low price
Wifi monitoring

This 10kWh battery pack, including BMS and storage, can be connected to the SolaX IES inverter in 1 column, all integrated and very easy to install. Whether it's the IES-X1 single-phase inverter or the SOLAX IES-X3 three-phase inverter, this pack can be fitted directly under the inverter.

This 15kWh battery pack, including BMS and storage, can be connected to the SolaX IES inverter in 1 column, all integrated and very easy to install. Whether it's the IES-X1 single-phase inverter or the SOLAX IES-X3 three-phase inverter, this pack can be fitted directly under the inverter.

With the SolaX Series Box, you can add a second battery tower to the X3 IES battery system connected to the inverter.

The Series Box also contains a base for the second battery tower and other necessary accessories such as power and communication cables.

The article is mandatory if you want to use more than 4 batteries in your IES system.

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Wifi key not included

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Wifi key not included

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Specific to the Belgian 3x230 network without neutral

Quick start
WIFI Internet monitoring 
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Wifi key not included

Quick start
WIFI Internet (included)
Integrated consumables management
Single-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Single-phase inverter
Management excess solar production into the grid

Quick start
WIFI Internet monitoring (included)
Integrated consumales management
Single phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring (key included)
Integrated consumables management
Single-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Single-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Single-phase inverter
Management Excess solar power into the grid

Compatible with all inverters
Wifi supervision
High voltage battery management
Consumables management
Output power: 3700 W
Excess solar production is not injected into the grid
Single-phase inverter

Compatible with all inverters
Wifi supervision
High voltage battery management
Consumables management
Output power: 5000 W
Excess solar production is not injected into the grid
Single-phase inverter

Output raised to 97,1%
Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Output raised to 97,1%
Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Output raised to 97,1%
Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Output raised to 97,1%
Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Output raised to 97,1%
Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Output raised to 97,1%
Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Compatible with all inverters
Wifi supervision
High voltage battery management
Output power: 15.000 W
Excess solar production is not injected into the grid
Three-phase inverter

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

Max. efficiency: 98.4%

MPPT voltage range: 180~1000Vdc

Max. 6 MPPTs, 2 strings per MPP tracker

PV oversizing input: 150%, Overloading output: 110%

Max. MPPT current: 32A

Inverter equipped with a Display

Max. efficiency: 98.4%

MPPT voltage range: 180~1000Vdc

Max. 6 MPPTs, 2 strings per MPP tracker

PV oversizing input: 150%, Overloading output: 110%

Max. MPPT current: 32A

Inverter equipped with a Display

Max. efficiency: 98.4%

MPPT voltage range: 180~1000Vdc

Max. 6 MPPTs, 2 strings per MPP tracker

PV oversizing input: 150%, Overloading output: 110%

Max. MPPT current: 32A

Inverter equipped with a Display

WIFI Internet monitoring
Integrated high voltage battery management
Operates without a power network
Three-phase inverter
Management Excess solar power into the grid
Parallel up to 10 inverters
Dephasing enable

Only Triple Power batteries are compatible with the inverter.

WIFI Internet monitoring
Integrated high voltage battery management
Operates without a power network
Three-phase inverter
Management Excess solar power into the grid
Parallel up to 10 inverters
Dephasing enable

Only Triple Power batteries are compatible with the inverter.

WIFI Internet monitoring
Integrated high voltage battery management
Operates without a power network
Three-phase inverter
Management Excess solar power into the grid
Parallel up to 10 inverters
Dephasing enable

Only Triple Power batteries are compatible with the inverter.

WIFI Internet monitoring
Integrated high voltage battery management
Operates without a power network
Three-phase inverter
Management Excess solar power into the grid
Parallel up to 10 inverters
Dephasing enable

Only Triple Power batteries are compatible with the inverter.

Quick start
WIFI Internet monitoring
Integrated consumables management
Three-phase inverter
Dephasing enable
Management Excess solar power into the grid

Wifi key not included

Quick start
WIFI Internet monitoring (included)
Integrated consumables management
Three-phase inverter
Management Excess solar power into the grid

LAN communication card to connect your SOLAX inverter and monitor its performance remotely.

This meter measures the power injected into electrical grid, consumption of your home. The connexion type is available in the installation instructions at the bottom of this page. 

It measures a voltage from 220V to 240V. Use it for single-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with CT clamps.

This meter measures the power injected into electrical grid, consumption of your home and power from another inverter SOLAX brand or other(dual version). The connexion type is available in the installation instructions at the bottom of this page. 

It measures a voltage from 40V to 400V. Use it for three-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with CT clamps.

This meter measures the power injected into electrical grid, consumption of your home. The connexion type is available in the installation instructions at the bottom of this page. 

It measures a voltage from 100V to 380V. Use it for three-phase networks. Thanks to the CT clamps, there is no limit to the power measured.

Delivered with CT clamps.

The SOLAX Series Box is used to install several towers. It is required for more than a total of 10 batteries to connect the products in series.
Compatible with Solax Triple Power HV-S2.5 and HV-S3.6 batteries.

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

Wifi communication card to connect your SOLAX inverter and monitor its performance remotely.

High Compatibility
Compatible with both single-phase and three-phase meters

Easy Installation
Supports din-rail installation inside the cabinet for 85 Vac-277 Vac power supply

Wide Coverage
Offers efficient and stable data transmission of up to 300 m long distance

Strong Penetration
With better signal through the wall effect, can provide up and down multi-floor communication, strong anti-interference ability

Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

To operate several microinverters together, you must add:

1. Main AC connector Ref: X1-AC-Micro-AC-Tcon (as many connectors as microinverters).

2. RefX1-MICRO-AC-TC24M or X1-MICRO-AC-TC22M or X1-MICRO-AC-TC16M

In order to operate a single microinverter, you must add:

1. Main AC connector Ref: X1-AC-Micro-AC-Tcon

2. Ref: X1-MICRO-AC-CONF

We can provide a full quotation on request by email.

Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Low price
WIFI connection (included)
Lightweight
Quick start
Single-phased inverter

Female AC plugs designed for secure and efficient connection within SolaX X1 Micro-Inverter systems, ensuring reliable power transmission.

Male AC plugs designed for secure and efficient connection within SolaX X1 Micro-Inverter systems, ensuring reliable power transmission.

Order the AC cable for SOLAX X1 microinverter with a length of 1.6m. Generally used for installations with solar panels in vertical format. It connects to the SOLAX trunk connector and allows the connection of all microinverters.

Order the AC cable for SOLAX X1 microinverter with a length of 2.2m. Generally used for installations with solar panels in horizontal format. It connects to the SOLAX trunk connector and allows the connection of all microinverters.

Use this connector from TRONC for SOLAX X1 microinverters to connect AC cables and microinverters. You have one side with a male end and the other female end. The 3rd is the end piece for connecting the SOLAX microinverter connector.

A specialized tool for safely disconnecting AC trunk ports, ensuring ease of maintenance and system management in SolaX X1 Micro-Inverter installations.

A convenient 5-meter Plug-and-Play cable designed specifically for seamless integration with SolaX X1 Micro-Inverters, simplifying installation processes.

This single-phase Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid SK-SU and Solax Hybrid X1-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs for 2 Solax outputs and 1 output for a parallel connection to your house grid.

Add this box if you wish to secure your power supply at all times and even in the event of a power outage.

Quick installation - Plug'n play
WIFI Internet monitoring  
5kWh storage
Works without a network
Integrated shadow management
Single-phase inverter

Quick installation - Plug'n play
WIFI Internet monitoring  
5kWh storage
Works without a network
Integrated shadow management
Single-phase inverter

Quick installation - Plug'n play
WIFI Internet monitoring  
5kWh storage
Works without a network
Integrated shadow management
Single-phase inverter

This Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid X3-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs for 2 Solax outputs and 1 output for a parallel connection to your house grid.

Add this box if you wish to secure your power supply at all times and even in the event of a power outage.

This Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid X3-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs for 2 Solax outputs and 1 output for a parallel connection to your house grid.

Add this box if you wish to secure your power supply at all times and even in the event of a power outage.

This Solax box allows the AC GRID output and the EPS output to be connected to the same injection point. This box works with Solax Hybrid X3-D-E inverters. The Solax Hybrid AC GRID output works with the power grid. The EPS output operates in the absence of electrical network, i.e. during a blackout. You have 2 inputs for 2 Solax outputs and 1 output for a parallel connection to your house grid.

Add this box if you wish to secure your power supply at all times and even in the event of a power outage.

Quick installation - Plug'n play
WIFI Internet monitoring  
10kWh storage
Works without a network
Integrated shadow management
Three-phase

Quick installation - Plug'n play
WIFI Internet monitoring  
10kWh storage
Works without a network
Integrated shadow management
Three-phase

Quick installation - Plug'n play
WIFI Internet monitoring  
10kWh storage
Works without a network
Integrated shadow management
Three-phase

Quick installation - Plug'n play
WIFI Internet monitoring  
10kWh storage
Works without a network
Integrated shadow management
Three-phase

Quick start
WIFI internet monitoring
Integrated battery management high voltage
Operate without a power network
Three phase inverter
Management Excess solar power into the grid
Shadow fix integrated

This is a kit consisting of the necessary components to install the X3-IES-15K with 30kWh solar storage.

Frameless, transparent bifacial glass modules
Performance Guarantee
Positive Tolerance 0-5W
30-Year Warranty
Complete Protection

Currently available only in full pallets
(25 pieces)

This base is essential if you wish to install the new ENPHASE 5P batteries on the floor.

- Wall-mounted enclosure

- Indoor use, IP54

- Rated current 250 A

- Dimensions: 1100 x 300 x 215mm

- Wall-mounted enclosure

- Indoor use, IP54 - 250 A, RAL 9016

- Dimensions: 1100 x 300 x 215mm

- Wall-mounted, indoor enclosure

- Protection class II, IP54

- Rated current In 250 A

- Dimensions: 1100 x 800 x 215 mm

- Wall-mounted enclosure

- Protection class II, IP54

- Rated current In 250 A

- Dimensions: 1100 x 1050 x 215 mm

- CA14V small distribution cabinet

- Indoor use, Protection II, IP44

- 400V AC 50/60 Hz, 125 A

- Dimensions: 650x300x160 mm

- Type CA15V small distribution board

- Powder-coated sheet steel, 800 x 300 x 160 mm

- 400V AC 50/60 Hz, 125 A

- IP44 protection, Protection Class II

- Product: CA16V, partially constructed small distribution cabinet

- Technical specifications: 400V AC 50/60 Hz, rated current In of 125 A, protection class II, IP44 protection

- Dimensions: 950 x 300 x 160 mm

- Weight: 13,068 kg.

- CA24V small distribution board

- 400V AC, 125A

- Dimensions: 650 x 550 x 160mm

- Model: CA25V

- Dimensions: 800 x 550 x 160 mm

- Voltage: 400V AC

- Protection: IP44

- Model: CA26V - Indoor surface mounting - Protection class II/IP44 - 400V AC 50/60 Hz, 125A

- Model: ComfortLine A series

- Indoor use, IP54 protection

- Dimensions: 1100 x 550 x 215mm

- Voltage: 400V AC 50/60 Hz

- Model: DD37V11VB

- Usage: Indoor

- Installation types: Surface-mounted, Flush-mounted, Partially inlaid

- Protection: Class II, IP54

- Product type: DF17U1B meter panel

- Dimensions: 1050 x 250 x 160 mm

- Power system: TN-S, 5-pole

- Rated current: In 40 A

- Model: DF17V1XD, ComfortLine series

- Voltage: 400V AC, Current: 100 A

- Dimensions: 1050 mm x 250 mm x 160 mm

- Protection: IP2XC, TN-S network system

- Model: DF27U11B meter panel

- Dimensions: 1050 x 500 x 160 mm

- Protection Class: IP2XC

- Manufactured: Germany

- ComfortLine series counter field

- Protection type IP2XC

- Dimensions: 1050 x 500 x 160 mm

- TN-S network system, 5-pole